More manufacturers

Mikura

Laboratory products from this manufacturer

Mikura Ltd is a independent company that since inception has designed/developed and manufactures a range of laboratory equipment. Mikura also carries out subcontract design/development and manufacture of both instruments and electromechanical components.
Products from this manufacturer Number of products

Microplate Fillers

4 products >
8.500  Autura 500
16.500  Autura 500
16.500-12  Autura 500
16.502  Autura 500DP

Microplate Readers

1 product >
8.600  Optica

Microplate Washers

8 products >
8.200  200 series
12.200  200 series
8.1000  Autura 1000
12.1000  Autura 1000
16.1000  Autura 1000
24.1000  Autura 1000
24.1384  Autura 1000
16.1384  Autura 1000

Shakers - Microplate

2 products >
1.075  Orbis
1.175  Orbis Plus

Shakers - Non Incubating

2 products >
1.080  Orbis
1.180  Orbis Plus (with timer)

Other laboratory products -

177 products >
8.410  8 channel magnetic particle washer/filler
75.001  ORBIS lid
200.108  Manifold Mikura 8 way includes carrier and tubing
200.112  Manifold Mikura 12 way includes carrier and tubing
200.208  Manifold Mikura 8 way includes carrier and reservoir kit
200.212  Manifold Mikura 12 way includes carrier and reservoir kit
1000.200  Pump Mikura additional pump to allow for 2 buffer reagents to be used (factory fitted)
1000.230  Wash head Mikura 384 step and Y sweep
1000.315  Sensor Mikura wash level
1000.316  Sensor Mikura waste level
5511  5A mains fuse
410.016  Wash head aspirate tube, 600mm lg 1/8 inch bore 3001 tygon
9000.504  Silicone Tubing IDØ1.0mm complete with connectors
9000.507  Silicone tubing ID Ø1.00mm1meter running length
9000.505  Silicone Tubing IDØ2.0mm complete with connectors
9000.509  Silicone tubing ID Ø2.00mm1meter running length
9000.508  Silicone tubing ID Ø3.00mm1meter running length
500.208  Waste pump tube - 2mmID x 4mm OD x 150mm lg
9000.501  Santoprene Tubing IDØ1.0mm complete with connectors
K000013  Pack 25 yellow Alpha tips
410.3009  Prime Trough
500.209  Small 0.62mm bore tube silicon tube, meter length
9000.502  Santoprene Tubing IDØ2.0mm complete with connectors
4505  Wash Head Pricker
6016  Male/Female IEC cable 2 mtr
051.001  0.20um filter, pack of 5
500.210  Medium 0.75mm bore tube silicon tube, meter length
3505  Wash head vacuum connector (pk 5)
500.211  Large1.00mm bore tube silicon tube, meter length
500.201  Pack of 48 P30 tips
3904  0.20um filter sterile
3923  Tip Connector
200.311  Vacuum bottle top fitting Red
400.317  Peri pump feed tubing
200.500  Tubing set
5508  Lid switch
410.012  8 channel manifold and sinker tube
3026  Bottle straw (pack of 10)
200.310  Pressure bottle top fitting Blue with needle valve and filter holder
1000.029  Wash and waste tubing set
500.207  Tip holders and Tube clips , pack 8
9000.506  Santoprene tubing ID Ø2.00mm 1meter running length
5514  Battery pack set - 2 batteries
9144  Shaker belt
9137  PTFE/Glass tape 10mm x 200mm (pack 10 off)
200.503  Filter/Silenser set (1+1)
400.503  Filter/Silencer set (1+1)
500.200  Filler head
400.321  Single row wash head tubing set
410.014  Cleaning probe set 10 off
6025  Power supply
3013  Rubber pressure strip x 365mm lg
1000.305  Wash bottle top assy Mikura NO level sensor.
1000.306  Waste bottle top assy NO level sensor.
410.006  1mm bore x 1mm wall 8 lumen tuding x 350lg
1000.320  Peristaltic Pump tubing (2 Channel)
410.011  IEC cable white connector and ferrite
6018  IEC quad block
6013  Foot Switch
400.4005  Membrane switch panel
9001  Pump complete
200.003  Main switch assy
1511  Fan
500.206  FEP feed tube set 8 + silicon multi lumen
8607  Mini pitch drive belt 630mm long
400.320  Peristaltic Pump tubing (2 Channel)
400.322  Double row wash head tubing set
6010  Power supply
1507  Shaker motors
600.112  Microplate guide assy Mikura
9100.001  Unoverse 9100 wall mounting bracket/stand
175.5000  Shaker speed control and timer pcb
300.4000  Heater assy
400.315  Wash level sensor (blue)
400.316  Waste level sensor (red)
6000  UK power supply
300.5001  Display PCB and cable
410.010  PC Waste Bottle with labels and punched cap
400.303  PC Wash Bottle with label and punched cap
400.304  PC Waste Bottle with label and punched cap
500.202  filler tube cassette, Small 0.62mm bore tube
300.3000  Lid
500.203  filler tube cassette, medium 0.75mm bore tube
410.005  1mm bore x 1mm wall 8 lumen tuding x 1200lg
410.2013  Drip tray slotted
500.204  filler tube cassette, large1.00mm bore tube
200.812  Plate station
410.015  Pharmed tubing ID Ø1.03 - set of 8 with connectors, yellow and grey tube saddle
200.250  Washer rinse addition
300.001  Fan assy / heater assy
200.301  Waste Bottle assy
9100.5  Complete PCB
410.007  8 channel peri pump tubing set, + connectors
410.5000  Heater Control PCB
300.5000  Control PCB
410.002  CPU set, master + remote
410.100  Complete tubing set, 410.015,410.012, 410.016 x 2, 410.006, 410.005
500.812  PTFE plate carrier
600.003  Printer interface Mikura PCB
600.111  Service kit Mikura
1000.012  12 channel wash head assy
400.008  Display PCB assy inc chip
300.003  Front cover inc membrane, inserts and feet
200.118  8 channel wash head assy with angled ST ST needles
410.008  Shaker sub assy
410.004  Vacuum pump assy
1506  Vacuum pump complete
400.007  Control PCB assy inc chip
410.013  Remote control PCB including chip
500.007  Control PCB assy inc chip
600.102  Software upgrade Mikura Optica from V1 to V2
410.009  Front Cover incl membrane and feet
600.108  Lamp block assy Mikura
600.405  Filter Mikura 405nm
600.492  Filter Mikura 492nm
600.545  Filter Mikura 545nm
600.570  Filter Mikura 570nm
600.690  Filter Mikura 690nm
1000.208  2 x 8 Channel wash head assy
1000.212  2 x 12 Channel wash head assy
410.001  Wash head
1000.224  2 x 24 Channel wash head assy
6508.001  Peristaltic pump complete
600.002  Software Mikura Optica V1
400.812  Aerosol cover
410.003  Main control PCB including master chip
600.004  Software Mikura Optica V2 for up to 10 different assays per session. Assays can be configured and saved on the hard disc ready for future use.
200.001  Pump housing assembly
9100.3003  tip holder support
1000.321  Single row wash head tubing set
6006  UK power supply
80.002  filter rack holder
600.113  Silicon drive motor sleeve (PAM-23926-U)
1000.322  Double row wash head tubing set
6499  Epson LQ350 dot matrix printer
MIK001-CARR01  Carriage cost Mikura to goods in
1.052  B-pette manual pipette controller
1.08  ORBIS personal tube shaker
1.09  INCA personal plate incubator
1.18  ORBIS PLUS as above with timer
51.002  0.45um filter
51.3  ASA Nose Cone
51.3001  Nose Cone white
51.3002  pipette holder
51.3003  Filter adaptor
51.3004  Nose Cone violet
51.3005  Nose Cone pink
51.3006  Nose Cone turquoise
75.2001  Anti slip mat
75.5  Shaker speed control board
80.001  Tube rack assy, rack and inner.
90.5  Control PCB
90.5001  Display PCB & cable
90.5003  Temperature sensor
200.008  8 channel wash head assy
200.012  12 channel wash head assy
200.3000  Pump housing moulding
200.300  Wash Bottle assy
400.006  Slotted opto assembly
400.4000  Membrane switch panel
1000.007  Project D control PCB programmed
1000.008  8 Channel wash head assy
1000.03  Front Cover incl membrane & feet
1000.031  Rear cover & feet
1000.2  Pump Mikura additional pump to allow for 2 buffer reagents to be used (factory fitted)
1000.317  Peri pump feed tubing
1000.812  Aerosol cover
1500  Pump
1502  Head lift motor with wires terminated
1503  Plate drive motor with wires terminated
1505  8 Channel peristaltic pump
3022  8 Channel moulded manifold
3510  Wash head non-return valve (pk 5)
3518  General Purpose Valve, 016.802.5.2 Rinse kit for 200 series washer
6004  Power supply
6005  Power supply
6501  Thermistor

  • Product update

    Introduction
    New Autura 1000 microplate washers from Mikura have been added.

    Features and benefits
    - Compact design.
    - Easy exchange of wash heads.
    - Easy to read back illuminated full alpha numeric display.
    - Separate dispense and aspirate channels reduce the possibility of cross contamination.

    Product category Manufacturer Wolf Staff Date
    Microplate Washers Mikura David Suddaby 11-Jul-2019

  • Product update

    Introduction
    Mikura non incubating shaker from Wolflabs. 

    Features and benefits
    - Minimal footprint.
    - Open construction for easy integration with robotic systems.
    - Accommodate all styles of microplate.
    - No maintenance required.
    - Variable speed control.
    - Counter balanced orbital shaking for stable and efficient operation.
    - Low operating voltage for added safety.
    - Ideal for field applications.

    Product category Manufacturer Wolf Staff Date
    Shakers - Non Incubating Mikura David Suddaby 10-Jan-2019

  • Product update

    Introduction
    Mikura Orbis microplate shaker from Wolflabs.

    Features and beenfits
    - Minimal footprint.
    - Open construction for easy integration with robotic systems.
    - Easy microplate location with robot arm pick-up recess.
    - Accommodate all styles of microplate.
    - Momentary shaking action.
    - No maintenance required.
    - Brush less DC motor for a quiet and reliable long life.
    - Variable speed control.
    - Counter balanced orbital shaking for stable and efficient operation.
    - Low operating voltage for added safety.
    - Ideal for field applications.
    - Washable, anti-slip mat.
    - CE Marked.

    Product category Manufacturer Wolf Staff Date
    Shakers - Microplate Mikura David Suddaby 10-Sep-2018

  • Product update

    Introduction
    Mikura Orbis non incubating shaker range from Wolflabs.

    Features and Benefits
    - Minimal footprint.
    - Open construction for easy integration with robotic systems.
    - Easy microplate location with robot arm pick-up recess.
    - Accommodate all styles of microplate.
    - Momentary shaking action.
    - No maintenance required.
    - Brush less DC motor for a quiet and reliable long life.
    - Variable speed control.
    - Timer – from 1 minute to 180 minutes (Orbis Plus only).
    - Counter balanced orbital shaking for stable and efficient operation.
    - Available in various colour combinations.
    - Low operating voltage for added safety.
    - Ideal for field applications.
    - Washable, anti-slip mat.
    - CE Marked.

    Product category Manufacturer Wolf Staff Date
    Shakers - Non Incubating Mikura David Suddaby 10-Sep-2018

  • Product update

    Introduction
    Mikura Optica microplate reader from Wolflabs. The Optica Plate Reader can be operated using either the on board software via it’s membrane key panel or through a PC. Results can be printed utilising a dot-matrix printer connected directly to Optica’s printer port or to any printer which is connected to the PC.

    Features and benefits
    - Two optical filters built-in as standard
    - Optional addition of two more filters
    - Full on board controls or control via PC
    - Accommodates all 96 well plate types
    - 8 independent channels
    - Quiet and reliable
    - Minimal footprint
    - CE Marked

    Product category Manufacturer Wolf Staff Date
    Microplate Readers Mikura David Suddaby 10-Dec-2017