Techne calibration equipment from Wolflabs

Product Update

Introduction
Techne Tecal 425F calibration equipment from Wolflabs. 

Features and benefits
- The medium-temperature Tecal 425F operates from 5°C above ambient to 425°C.
- Reaches maximum temperature in 12 minutes.
- Weighs 6.3kg
- Has the same temperature accuracy and uniformity performance as the 140F model.

Techne calibration equipment from Wolflabs

Product Update

Introduction
Techne UCAL 400+ calibration equipment from Wolflabs. The UCAL400+ Calibrator provides a safe, dry and constant temperature source, and can be used either on a bench top or as a portable field unit. The unit covers the temperature range from 5°C above ambient up to 430°C using a machined aluminum insert block as the heat transfer medium. The temperature control circuit is built into the unit. Even though the unit heats up rapidly, highly efficient insulation ensures that the case remains cool enough to handle even at maximum operating temperatures. This calibrator has been designed to comply with all relevant Radio Frequency interference and electrical safety regulations.

Features and benefits
- Wide temperature range
- Built in program for thermal switch testing
- Maximum temperature of 430°C/806°F
- Fast heat up and cool down
- 10 insert formats available
- Independent over-temperature protection
- Only 4Kg with included multi-well insert and NIST certificate

Techne calibration equipment from Wolflabs

Product Update

Introduction
Techne Tecal 140F calibration equipment from Wolflabs. A range of lightweight dry-block thermal calibrators that operate from 45°C below ambient up to 650°C has been developed by Techne for convenient use in the field.

Features and benefits
- The Tecal 140F operates between 45°C below ambient (typically -20°C) and 140°C with a temperature accuracy of ±0.3°C and a temperature uniformity of ±0.2°C.
- Heating time to 100°C is five minutes.
- All the models are offered with or without RS-232 communications and can be used with a wide range of inserts to suit different probe sizes.
- Automatic fan cooling is standard, with accelerated cooling probes also available.

New range of Techne calibration equipment from Wolflabs

Product Update

New Tecal and Ucal series calibration equipment from Techne has been added.