Item shown is representative of range - Catalogue No.:10375

Item shown is representative of range - Catalogue No.:10375

Sigma - 3-30KS

Stock Code: 10375

Centrifuge benchtop Sigma 3-30KS for general purpose applications, minimum tube size 0.2ml, maximum tube size 100ml, maximum g force 65403, min temperature -20°C, max temperature 40°C, run counter, no rotor included

read more

List Price: Offer Price: Quantity:
£17,335.00 £13,746.00
List Price: £17,335.00
Offer Price: £13,746.00
Quantity:
Manufactured in european2 Years WarrantyDelivery Time

Centrifuge benchtop Sigma 3-30KS for general purpose applications, minimum tube size 0.2ml, maximum tube size 100ml, maximum g force 65403, min temperature -20°C, max temperature 40°C, run counter, no rotor included


Power Draw:0.50kW
Ecological Features:Unit features an energy efficient induction drive motor
Min tube volume:0.2ml
Max tube volume:100ml
Max g force:65403
Min temperature:-20°C
Max temperature:40°C
For general purpose use:Yes
For cell culture - low capacity use:No
For cell culture - medium capacity use:No
For cell culture - high capacity use:No
For cytology - CSF use:No
For cytology - urine use:No
For microplates:No
For serum/plasma use:No
Run counter:Yes
Rotor included:No

Minimum specification that this product meets

  • A motorised lid interlock system that prevents user access to the rotor whilst it is in motion and prevents the rotor turning whilst the lid is open
  • The rotor bowl, lid and external casing must be sufficiently robust to be able to contain the rotor and all samples therein in the event a rotor or drive spindle failure
  • A range of interchangeable rotor options, including swing-out or fixed-angle rotors, with a variety of bucket/tube capacities.
  • Rotor imbalance detection and cut out
  • A variable speed controller with the potential of centrifugation above 20,000rpm. The accuracy of the rotor speed against the display should be no more than
  • 100rpm or
  • 1%, whichever is the least.
  • A facility to control the acceleration/deceleration rates of the rotor.
  • An adjustable timer to control the duration of centrifugation with a minimum range of 1 minute to 99 hours
  • A cooling system that does not utilise CFC refrigerants
  • Adjustable rotor and rotor bowl temperature with a minimum range of 0oC to +40oC in 1oC increments and an variation not exceeding
  • 2oC
  • Straightforward, self-evident controls requiring the minimum of training
  • Legible digital display(s) capable of showing set time, temperature and speed and actual time, temperature and speed
  • Electrical operation utilising a plug in or hard-wired isolated 30 Amp, single phase supply at 230V 50Hz or from a 230 volt, AC (50hz), power supply with a three-pin plug top to BS1363

Desirable features of this product

  • The option to fit a sealed rotor for the centrifugation of hazardous materials
  • Display of relative centrifugal force as well as rotor speed
  • Stainless steel inner chamber
  • A programmable stepping mode to allow changes of rotor speed during the run.
  • A rotor identification system to prevent the user operating rotors beyond their recommended speed.

Desirable features this product does not have

  • Dampened lid closing to prevent injuries to hands and arms
  • A programmable memory capable of storing several speed and timer settings
  • A design which reduces the risks of physical injury associated with the installation and removal of rotors