Cole-Parmer HM-100, HM-200 & SHM-200 Series Heating Mantles from Wolflabs

Product Update

Introduction
Cole-Parmer HM-100, HM-200 & SHM-200 Series Heating Mantles from Wolflabs. 

Features and benefits
- “Cool-to-touch” outer casing
- Element temperatures up to 450°C
- Indicator lamps for power and heater operation
- Replaceable insulated heater cartridge
- Rugged, easy to clean powder coated aluminium casing
- Flexible coiled heating elements absorb shock, minimising the risk of flask breakage

New Medline Scientific heating mantles from Wolflabs

Product Update

New E, DM and ES series of heating mantles from Medline Scientific have been added. 

Cole-Parmer - Electrothermal heating mantles from Wolflabs

Product Update

Introduction
Cole-Parmer - Electrothermal OMCA heating mantles from Wolflabs. Digi-Mantles enable a flask of 250ml, 500ml or 1000ml capacity to be stirred and heated up to an element temperature of 450°C through precise electronic control, giving an accurate measure of temperature and stirring. The modular design allows heating cartridges of different sizes to be interchanged using the same OMCA digital controller as a base, which makes the Digi-Mantles a very cost-effective option.

Features and benefits
- Same OMCA controller accommodates different capacity heating cartridges, ie. interchangeable design
- Round bottom flask capacity of between 250ml - 1000ml
- “Cool-to-the-touch” design
- Greater stirring stability and speeds from 100 to 2000rpm
- Controller with display menus and touch pad interface
- Indicator lights for power, stirrer and heater operation
- Support rod clamps

Cole-Parmer - Electrothermal heating mantles from Wolflabs

Product Update

Introduction
Cole-Parmer - Eletcrothermal EMEA heating mantles from Wolflabs. The Electrothermal electromantle extraction heater with three and six recesses has a built-in electronic controller and offers a choice of heater only or heater/stirrer combination. Vented case’s unique air flow ensures the case remains “coolto-the-touch.”

Features and benefits
- Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
- Three 12.7mm(0.5in) diameter support rods are included
- Top cover is polypropylene and external surfaces are powder coated and resistant to most chemical solutions
- Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support, while removing sparking associated with mechanical switching
- Heater cartridge is easy to replace
- Earth (ground) screen encloses the heater for added safety
- Pilot lights indicate when power is on and supplied to heaters and supplied to stirrers

Cole-Parmer - Electrothermal heating mantles from Wolflabs

Product Update

Introduction
Cole-Parmer Electrothermal CMUA heating mantles from Wolflabs. The CMUA Stirring Electromantle shares all the excellent features of the CMU Electromantle but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution volumes and viscosities using a magnetic stir bar.

Features and benefits
- Round bottom flask capacity of between 50ml- 5000ml
- Stirring speed up to 2000rpm
- Auto-recapture of magnetic stir bar; simple switch to re-activate stirring
- “Cool-to-the-touch” design
- Element temperature up to 450°C
- Built-in energy regulator
- Indicator lamps for power and heater operation
- Replaceable insulated heater & stirring cartridge
- An easy to clean, powder coated aluminium outer casing
- Non-skid feet and support rod clamps (not including support rod)
- Added safety features such as a grounded earth screen and double fuses
- CSA approved for 115V models