Heating Mantles News

Introduction
Cole-Parmer HM-100, HM-200 & SHM-200 Series Heating Mantles from Wolflabs. 

Features and benefits
- “Cool-to-touch” outer casing
- Element temperatures up to 450°C
- Indicator lamps for power and heater operation
- Replaceable insulated heater cartridge
- Rugged, easy to clean powder coated aluminium casing
- Flexible coiled heating elements absorb shock, minimising the risk of flask breakage

Prices staring at £145 - http://www.wolflabs.co.uk/laboratory-products/heating-mantles

Prices starting at £152 - http://www.wolflabs.co.uk/laboratory-products/heating-mantles

Introduction
Electrothermal Engineering CMU heating mantles from Wolflabs. CMU Uncontrolled Electromantles are used in wet chemistry to heat liquids in round bottom flasks. The metal case is designed to remain “cool-to-the-touch” when in operation. Electrothermal heating mantles have a grounded stainless steel earth screen covering the element and are double fused for added safety. 

Features and benefits
- Valuable for fume hood or remote working
- Must be used with a controller; the MC5 & MC242 Controllers are our recommended ones
- Round bottom flask capacity of between 50ml - 5000ml
- “Cool-to-the-touch” design
- Element temperature up to 450°C
- Indicator lamps for power and heater operation
- Replaceable insulated heater cartridge
- An easy to clean, powder coated aluminium outer casing
- Non-skid feet and support rod clamps (not including support rod)
- Added safety features such as a grounded earth screen and double fuses

Introduction
Electrothermal Engineering EM series of heating mantles from Wolflabs. Electrothermal Electromantle features a durable, chemically resistant, polypropylene outer housing that minimizes damage from spills.

Features and benefits
- Element temperature 450oC (842o F)
- Use with round-bottom flasks from 50ml to 5L
- Built-in energy regulator
- Insulated material in removable heater cartridge
- Pilot lamps for power and heater operation
- Model EM5000/CE has two circuits

Prices starting at £157 - http://www.wolflabs.co.uk/laboratory-products/heating-mantles

Introduction

The HM series are a range of controlled heating mantles, available in a range of sizes to accommodate round bottom flasks from 50ml to 1000ml. The entire range is constructed with a robust aluminium casing, making them tough and easy to clean. All units feature an integrated clamp rod fitting to enable secure fitting of a standard clamp rod. Non-slip feet are also fitted as standard. For added safety, all units feature an emergency cut out which will automatically trigger in the event of a spillage.

Features and Benefits

- Controlled up to 450ºC
- Range of sizes available
- Tough lightweight, easy to clean aluminium casing
- Integrated clamp fitting

Introduction
Cole-Parmer - Electrothermal EMA series of heating mantles from Wolflabs. The EMA Electromantle shares all the features of the standard EM Electromantle, but has the added functionality of magnetic stirring. The solid state stirring circuitry is built into the base of the main housing and provides powerful stirring over a range of capacities and viscosities. The stir bar is seldom lost due to our "auto-recapture" function.

Features and benefits
- Accepts round bottom flasks from 50ml to 2 litres capacity
- Bi-directional stirring speeds up to 520rpm
- Stir bar "auto-recapture" function
- "Cool-to-touch" design
- Maximum element temperature 450°C
- Built-in energy regulator
- Replaceble insulated heater cartridge
- Indicator lamps for power and heater operation
- A chemically resistant polypropylene outer casing
- A grounded earth screen and double fuses for extra safety
- Bracket for 1.3cm support rods (but not including the support rods)

Introduction
Cole-Parmer - Electrothermal CMUT series of heating mantles from Wolflabs. The CMUT Electromantle is a muiltiple volume CMU Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Electromantle.

Features and benefits
- Multiple volume round bottom flask capacity of between 250ml - 1000ml
- “Cool-to-the-touch” design
- Element temperature up to 450°C
- Built-in energy regulator
- Indicator lamps for power and heater operation
- Replaceable insulated heater cartridge
- An easy to clean, powder coated aluminium outer casing
- Non-skid feet and support rod clamps (not including support rod)
- Added safety features such as a grounded earth screen and double fuses
- CSA approved for 115V models

Introduction
Cole-Parmer - Electrothermal EME series of heating mantles from Wolflabs. The Electrothermal Electromantle Extraction Heater with three and six recesses has a built-in electronic controller and offers a choice of heater only or heater/stirrer combination.

Features and benefits
- Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
- Three 12.7mm(0.5in) diameter support rods are included
- Top cover is polypropylene and external surfaces are powder coated and resistant to most chemical solutions
- Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support, while removing sparking associated with mechanical switching
- Heater cartridge is easy to replace
- Earth (ground) screen encloses the heater for added safety
- Pilot lights indicate when power is on and supplied to heaters and supplied to stirrers

Introduction
Cole-Parmer Electrothermal CMUA heating mantles from Wolflabs. The CMUA Stirring Electromantle shares all the excellent features of the CMU Electromantle but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution volumes and viscosities using a magnetic stir bar.

Features and benefits
- Round bottom flask capacity of between 50ml- 5000ml
- Stirring speed up to 2000rpm
- Auto-recapture of magnetic stir bar; simple switch to re-activate stirring
- “Cool-to-the-touch” design
- Element temperature up to 450°C
- Built-in energy regulator
- Indicator lamps for power and heater operation
- Replaceable insulated heater & stirring cartridge
- An easy to clean, powder coated aluminium outer casing
- Non-skid feet and support rod clamps (not including support rod)
- Added safety features such as a grounded earth screen and double fuses
- CSA approved for 115V models

Introduction
Cole-Parmer - Eletcrothermal EMEA heating mantles from Wolflabs. The Electrothermal electromantle extraction heater with three and six recesses has a built-in electronic controller and offers a choice of heater only or heater/stirrer combination. Vented case’s unique air flow ensures the case remains “coolto-the-touch.”

Features and benefits
- Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
- Three 12.7mm(0.5in) diameter support rods are included
- Top cover is polypropylene and external surfaces are powder coated and resistant to most chemical solutions
- Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support, while removing sparking associated with mechanical switching
- Heater cartridge is easy to replace
- Earth (ground) screen encloses the heater for added safety
- Pilot lights indicate when power is on and supplied to heaters and supplied to stirrers

Introduction
Cole-Parmer - Electrothermal OMCA heating mantles from Wolflabs. Digi-Mantles enable a flask of 250ml, 500ml or 1000ml capacity to be stirred and heated up to an element temperature of 450°C through precise electronic control, giving an accurate measure of temperature and stirring. The modular design allows heating cartridges of different sizes to be interchanged using the same OMCA digital controller as a base, which makes the Digi-Mantles a very cost-effective option.

Features and benefits
- Same OMCA controller accommodates different capacity heating cartridges, ie. interchangeable design
- Round bottom flask capacity of between 250ml - 1000ml
- “Cool-to-the-touch” design
- Greater stirring stability and speeds from 100 to 2000rpm
- Controller with display menus and touch pad interface
- Indicator lights for power, stirrer and heater operation
- Support rod clamps

New E, DM and ES series of heating mantles from Medline Scientific have been added.