Incubators - Stability Chambers News

Introduction
Binder KBF and KBF Pro Stability Chambers from WolfLabs.
BINDER’s KBF and KBF PRO Stability Chambers set the standard for constant climate control, delivering unmatched precision for long-term stability testing in industries such as pharmaceuticals, food, and cosmetics. Designed to meet ICH guidelines, these chambers provide precise temperature and humidity control, ensuring reliable storage conditions for sensitive products. The KBF PRO series offers advanced features, including a heated humidity sensor and extended programming options, making it ideal for demanding applications.  

Features and benefits
- Precise Climate Control – Ensures accurate temperature and humidity regulation, meeting ICH stability testing requirements.
- Uniform Conditions – Homogeneous climate distribution across the entire chamber guarantees consistent and reliable test results.
- Advanced Programming & Monitoring – Intuitive controls with extensive programming options for customised test conditions.
- Heated Humidity Sensor (KBF PRO) – Reduces condensation and ensures long-term measurement accuracy.
- Energy-Efficient Operation – Optimised performance with low energy consumption for sustainable and cost-effective testing.

Introduction
Haier HHS Series of stability chamber incubators from Wolflabs.

Features and benefits
- 10-inch LCD touch screen
- Long-term reliability without the need for calibration
- High precision temperature sensor, accurate and reliable
- Adopts semi-conductor control, low noise, low vibration, and no pollutants
- Intelligent control PTC humidification, energy-saving and water-saving

Introduction
Binder KBF-S ECO 400 stability chamber incubators from Wolflabs.

Features and benefits
- APT.line™ preheating chamber technology
- Independent water supply via tank
- LCD to display temperature and humidity along with additional information and alarms
- Internal data logger, measured values can be read out in open format via USB
- Unit self-test for comprehensive status analysis

4 Incubators (Stability Chambers) Tips in Line with Sustainability

Wolflabs is committed to halve carbon emissions by 2030, and as many other companies look at ways they can be more sustainable, we have four tips on how to run your Incubators (Stability Chambers) more sustainably.

1      Ensuring that regular maintenance work is performed at least once a year keeps your incubator working to the best of its ability and picks up any hidden faults or wear and tear issues that may be hampering performance.

2      Check for wear and tear on door seals at least once a year. If the door is not sealing properly across the whole surface, your energy costs will be needlessly high.

3      Choosing cabinets with automatic lighting and timers can not only be better for timed experiments but will also save more energy. Once the desired light dosage is achieved, the chamber switches off automatically.

4      With an increased amount of dust in the ambient air, clean the Peltier fan grid by suction or blowing several times a year. This will keep the equipment clean, and also ensure it is functioning efficiently.   

Would you like pricing on servicing or a trade-in or re-use value for this type of equipment? If so please Email Us.

Click Here for energy saving tips on other product categories 

New Incubators - Stability Chambers added to the website. This includes Ultrasonic Humidity Cabinets and Salt Solution Humidity Cabinets from LEEC.

Wolflabs Binder :: Stability Chambers – New products added to the website. Models include; 9020-0244, 9020-0246, 9020-0248 and 9020-0249.

An entry level stability chamber from Binder

9020-0139-Offer - Wolf special offer - Stability chamber Binder KBF115 controllable for temperature and humidity - 115L capacity OFFER ENDS 24-12-2014
 

Discounts of almost 20% - http://www.wolflabs.co.uk/laboratory-products/incubators-stability-chambers

New KBF1020 stability chamber incubator from Binder has been added.

Introduction
All cabinets have stainless steel interiors fitted with adjustable shelves. All SF models have sealed chambers making them suitable for humidities up to 98%. SF models can have an outer door heater (extra cost option) to demist the inner glass doors. CFC-free polyurethane insulation provides very efficient thermal stability in all models. A 12mm access port is provided as standard. Monitoring and control of both heating and cooling functions is performed with great accuracy, and achieves typical temperature stability of ±0.5°C. The microporcessor based digital display allows the temperature performance to be easily verified. A digital over temperature safety cut out is fitted to all models. Salts-type SF models rely on forced evaporation from trays containing known saturated salt solutions. This is a simple and reliable method of humidity control.

Features and benefits
- Tried and trusted technology.
- Simple to use.
- Available as "heat only" or "heat and cool".

Introduction
The KBF series is ideal for standard-compliant work according to ICH guidelines. As an inexpensive alternative to using multiple types of climate chambers, the Binder constant climate chambers can be used for a number of applications.

Features and benefits
- Temperature range: 0 to 70 °C
- Humidity range: 10 to 80 % RH
- APT.line preheating chamber technology
- Humidity regulation with capacitive humidity sensor and steam humidification
- Controller with time-segment programming
- Tightly sealed inner door made of tempered safety glass
- 2 stainless steel racks
- Access port with silicone plug, 30 mm, left
- 4 stable castors, two with brakes, from KBF 240
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Door heating

Introduction
Binder KBF P series stability chamber incubators from Wolflabs. The Binder KBF P, equipped with ICH-compliant illumination, is the expert for photostability testing and provides clear and meaningful test results according to ICH guideline Q1B, Option 2. At the same time, the variable position illumination cassettes with BINDER Q1B Synergy Light ensure homogeneous lighting conditions.

Features and benefits
- Constant and gentle circulation of air through large-surface side walls even under a full load
- Homogeneous climate conditions throughout test specimens
- ICH-compliant illumination with Binder Q1B Synergy Light 
- Removable illumination cassettes
- Direct connection to the domestic water system
- Convenient water treatment with Binder pure aqua service 
- Sewage pump for discharges up to 1m in height
- Vapor pressure humidification for fast response times
- Drift-free, capacitive humidity sensor
- Short recovery time after door opening
- Powerful compressor cooling system for ambient temperatures up to 32 °C
- No freezing, thanks to double evaporator plate
- Ethernet interface
- Access port diameter 30mm
- Casters from 240l volume
- Inner glass door with seal and double outer door seal
- Door heated against condensation
- 25 program memory
- Digital continuous-line recorder for monitoring limits
- Alarm function
- GLP/GMP, IQ, OQ, PQ, DQ FDA-compliant software APT-COM 
- Years of proven and recognized validation and documentation materials

Introduction
Binder KBF LQC series stability chamber incubators from Wolflabs. The special advantage of BINDER KBF LQC series: the patented photometry for photostability testing. Two spherical 3D ball-type sensors capture visible light intensity and UV light intensity – if the desired light dosage is achieved, it switches off automatically.

Features and benefits
- Electronically controlled APT.line preheating chamber and refrigerating system assuring temperature accuracy and reproducible results
- 2 variable positioned illumination cassettes with Binder Q1B Synergy Light for unique homogenous light distribution
- Illumination is specified for stability in accordance with ICH guideline Q1B, option 2
- Light Quantum Control LQC, precise measurement and integration of light intensity and ultraviolet light intensity directly at the sample location, automatic deactivation after reaching the wanted light dosage
- Temperature range 0 °C to 70 °C (without illumination and humidity)
- Temperature range 10 °C to 60 °C (with illumination and humidity)
- Humidity range 10 % to 80 % RH (without illumination)
- Humidity range 10 % to 75 % RH (with illumination)
- MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
- User friendly LCD screen
- Easy-to-read menu guide
- Integrated electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real time clock
- Electronically controlled humidification and dehumidification system with capacitive humidity sensor suitable for stability tests according to ICH guideline Q1A (R2)
- Inner glass door with sealing
- Independent adjustable temperature safety device class 3.1 (DIN 12880), with visual and audible temperature alarm
- Access port with silicone plug Ø 30 mm, left side
- Safety connection kit for water supply and drainage, including water hose, total length 6m
- Ethernet interface for APT-COM DataControlSystem software
- 2 stainless steel racks
- Binder test confirmation

Introduction
New KBF stability chambers from Binder have been added. Constant climate chambers with large temperature / humidity range.

Features and benefits
- Temperature range: 0 °C to 70 °C
- Humidity range: 10 % to 80 % RH
- APT.line™ preheating chamber technology
- Humidity regulation with capacitive humidity sensor and vapor humidification
- Inner chamber made of stainless steel
- Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
- Tight-sealing inner door made of safety glass (ESG) with special TIMELESS coating
- 2 stainless steel racks
- Access port with silicone plug, 30 mm, left
- 4 stable castors, two with brakes, from 240 liters
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Door heating

New KBFP240, KBFP720, KBFLQC240 and KBFLQC720 stability chambers from Binder have been added.

New KBFS stability chamber range from Binder has been added.

New KBF-S series stability chamber incubators from Binder have been added. 

Features and benefits
- Precise temperature and humidity control.
- Standard-compliant testing according to ICH Q1A.
- Inner chamber made completely of stainless steel.
- Unit self-test for comprehensive status analysis.
- LCD to display temperature and humidity along with additional information and alarms.

New KBF-S ECO 1020, 720 and 240 Solid Line stability chamber incubators from Binder have been added. 

New KBF-S ECO Solid.Line Incubator Stability Chambers have been added.