Ovens - Materials Testing News

Introduction
Binder FP series material testing ovens from Wolflabs. 

Features and benefits
- Temperature range: +10 °C above ambient temperature up to +300 °C
- High temperature accuracy thanks to APT.line™ technology
- Adjustable fan speed
- Controller with interval and real-time programming
- Internal data logger, measured values can be read out in open format via USB

New product category ‘Ovens - Materials Testing’ added to the website along with a selection of Binder models. Models include: FP53, M53, M115, M240, M400, M720, FP115, FP240, FP400, and FP720.

Prices starting at £1242 - http://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Introduction
A Binder material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.

Features and benefits
- Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above ambient temperature to 300 °C
- MP controller with 2 programs with 10 sections each, or alternatively 1 program with 20 sections
- The time of an individual program step can be set to max. 99.59 hours or 999.59 hours. This adjustment applies to all program sections
- Integrated weekly program timer with real-time function
- Adjustable ramp function via program editor
- Digital temperature setting with an accuracy of one degree
- Adjustable fan speed
- Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
- Elapsed time indicator Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- BINDER test confirmation

Prices starting at £1242 - http://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Introduction
Binder M series materials testing ovens from Wolflabs. With a maximum temperature of 300 °C and comprehensive programming options, the M series from Binder is ideally suited for material and aging testing. The high-performance fan ensures fast heating.

Features and benefits
- Electronically controlled APT.line preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above ambient temperature to 300 °C
- MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
- User-friendly LCD screen
- Easy-to-read menu guide
- Integrated electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real-time clock
- Adjustable ramp function via program editor
- Program-controlled ventilation flap
- High air-exchange rate through high-performance fan
- Adjustable fan speed
- Exhaust duct Ø 50 mm
- Temperature safety device class 2 (DIN 12880) with visual alarm
- Printer and communication interface RS 422 for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM DataControlSystem software
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- Binder test confirmation

Prices starting at £1541 - http://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

New MTO material testing oven range from Genlab have been added.

Discounts of almost 30% - https://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Materials testing oven Binder FP115 115l capacity, no advanced programmability, no humidity control, fan, maximum temperature 300°C, voltage 230V 1N, 50/60Hz.

Introduction
Binder FP720 material testing ovens from Wolflabs. 

Features and benefits
- Temperature range: room temperature plus 5 °C to 300 °C.
- Adjustable fan speed.
- Adjustable exhaust air flap.
- Controller with time-segment and real-time programming. 

Introduction
Binder M720 materials testing oven from Wolflabs. With a maximum of 300°C and various programming options the M720 material test oven is ideal for material and aging tests. 

Features and benefits
- Advanced programming options.
- Outstanding thermal insulation saves operation costs.
- Identical test conditions throughout the chamber interior independent of sample size and quantity.
- Adjustable fan speed.

Introduction
Genlab RTFO material testing oven from Wolflabs. The RTFO oven procedure provides simulated short term aged asphalt binder for physical property testing. Asphalt binder is exposed to elevated temperatures to simulate manufacturing and placement aging. The RTFO also provides a quantitative measure of the volatiles lost during the aging process. The exterior is constructed from sheet steel finished in an easy clean powder coated paint and the interior chamber is made from stainless steel.

Features and benefits
- Double wall construction with high density thermal insulation.
- Dual display microprocessor digital control.
- Independent overheat thermostat.
- Flow meter to control airflow.

Introduction
Genlab material testing oven from Wolflabs. This dual purpose oven is designed to perform loss on heat and thin film test for bitumin and asphaltic materials.

Features and benefits
- Temp range 40ºC to 200ºC, preset at 163ºC.
- Supplied with 2 off aluminium turntables.
- Stainless steel interior.
- Independent overheat thermostat.
- High accuracy.
- Excellent stability.

Introduction
Binder B115 material testing oven from Wolflabs.

Features and benefits
- Uniform drying conditions.
- Identical test conditions throughout the chamber interior independent of sample size and quantity.
- Outstanding thermal insulation saves operation costs.
- Advanced programming options.

Introduction
Binder FP240 materials testing oven from Wolflabs.

Features and benefits
- Adjustable fan speed.
- Outstanding thermal insulation saves operation costs.
- Identical test conditions throughout the chamber interior independent of sample size and quantity.
- Adjustable exhaust air flap.
- Controller with time-segment and real-time programming.

Introduction
Genlab LOH/TFO material testing oven from Wolflabs.

Features and benefits
- High accuracy.
- Excellent stability.
- Low chamber uniformity.
- Stainless steel interior.
- Supplied with 2 off aluminium turntables.

Introduction
Binder FP400 material testing oven from Wolflabs.

Features and benefits
- Identical test conditions throughout the chamber interior independent of sample size and quantity.
- Outstanding thermal insulation saves operation costs.
- Advanced programming options.
- Adjustable fan speed.
- Adjustable exhaust air flap.

Introduction
Binder M400 material testing oven from Wolflabs. 

Features and benefits
- Powerful fans with high air flow ensure rapid heating.
- Uniform drying conditions.
- Adjustable fan speed.
- Program-controlled ventilation flap.
- Colour LCD controller with time-segment programming.