Ovens - Vacuum News

Introduction
Cole-Parmer Programmable and Botanical vacuum oven from Wolflabs.

Features and benefits
- PID temperature controller provides accurate and reliable heating
- Full-view window allows continuous monitoring
- Rounded inner chamber corners offer easy cleaning
- Built-in alarm alerts when oven shuts down for safety
- Stainless steel inner chamber and powder-coated steel plate exterior resist corrosion for longer lifetime

Hi Jenny

The unit has just arrived! I am very excited about using it and would like to thank you for all of your correspondence and efforts that have led to its final delivery.

Many thanks,

Customer

Vacuum Ovens from Medline Scientific have been added to the website. 13115 - Vacuum oven Medline Scientific Lab Companion OV-11 28 Litres and 13125 - Vacuum oven Medline Scientific Lab Companion OV-12 65 Litres.

Prices starting at just over £2,000 here - http://www.wolflabs.co.uk/laboratory-equipment/ovens-vacuum

Discounts of over 25% - http://www.wolflabs.co.uk/laboratory-products/ovens-vacuum

Introduction
The Fistreem Vacuum Oven features a spacious rectangular chamber with toughened glass viewing window and shatter-resistant safety screen. An electronic digital PID controller allows for easy and faster temperature setting with integral over temperature alarm indication. By using reduced pressure, the Fistreem Vacuum Oven enables heat sensitive materials to be dried at low temperatures. Alternatively, more stable samples may be dried more rapidly at higher temperatures, without fan circulation. This oven is also particularly useful for controlled atmosphere heating (e.g. curing of resins under nitrogen or reduced oxygen conditions). Since the inner chamber is sealed, it may also be suitable for solvent removal work, subject to adequate exhaust and ventilation conditions being provided for the oven and room respectively.

Features and benefits
- Compact size, large load (31lt) capacity 
- Popular 'Gallenkamp' design now upgraded
- Digital PID controller for easy and faster temperature setting with over temperature alarm indication 
- Independent over temperature safety protection 
- Easy to read vacuum gauge  
- Highly versatile oven for atmospheric or reduced atmosphere operation  
- Suitable for solvent removal  
- Tough steel construction with strong door closure  
- Toughened glass window with polycarbonate safety screen 
- Front mounted push-on connectors

Introduction
The Binder VD series chamber is impressive while gently drying with its homogeneous temperature distribution. The patented expansion shelf technology ensures optimal heat transfer. The shelves are easy to position where required and easy to dry in the inner chamber.

Features and benefits
- Electronically controlled APT.line preheating chamber with 2 expansion racks assuring temperature accuracy and reproducible results
- Temperature range from 15 °C above ambient temperature to 200 °C
- MP controller with 2 programs with 10 sections each or switchable to 1 program with 20 sections
- Integrated weekly program timer with real-time function
- Digital temperature setting with an accuracy of one degree
- Elapsed time indicator
- Precision-adjustable ventilation valve (for VD 23, the standard inert gas connection is also used as the ventilation valve)
- Precision-adjustable inert gas valve with Cross-Flow-Technology
- All electrical components are decoupled from the inner chamber
- Spring-mounted safety glass panel with shatter protection
- Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- Measuring port DN 16 in rear panel
- Analog pressure gauge (displays pressure difference between the inner chamber and ambient pressure)
- Electro polished inner chamber, suction and ventilation tubes, pressure container, expansion racks, and ball valve are made of stainless steel
- Door gasket made of tempered silicone 2 x 24 V DC (max 0.4 A) switching outputs, switched via 2 control contacts in the program editor
- RS 422 interface for communication software APT-COM DataControlSystem
- 2 patented, flexible aluminum expansion racks
- Also available as complete system with module and vacuum pump.
- Reduced noise level
- Practical working height
- Coordinated system Binder test confirmation

Introduction
Townson & Mercer EV018 vacuum oven from Wolflabs. The EV018 vacuum oven has the ideal design for gentle drying of heat labile samples and experiments under inert gases and optimizes under inert gases and optimises the control of temperature and pressure is obtained by the sheet heaters surrounding the chamber with the combination of PID microprocessor control system.

Features and benefits
- Digital controls for easy setup
- Easy to set 100 hour timer functions
- Multiple setpoints per program
- Stainless Steel Interior
- Square chamber to minimise wasted space
- 70 – 200 Degrees C temperature range

Discounts of over 20% - http://www.wolflabs.co.uk/laboratory-products/ovens-vacuum

Introduction
Medline Scientific OV series of vacuum ovens from Wolflabs. OV series ovens are ideal for separating solvents from solutions without using high temperature drying and for drying solvents with high boiling points in a vacuum oven reduces the boiling point of the solvent to make drying easy.

Features and benefits
- From +5 degrees C above room temperature to 250C.
- Vacuum range: 0 to 0.1MPa (analog vacuum gauge).
- Microprocessor PID control / Auto-tuning / Calibration.
- Digital timer: 1 min ~ 99 hr 59 min, delayed ON / OFF.
- Over-temperature limit / Door open alarm.
- Preset 3 most commonly used temperature settings.
- Digital LED display using touch-sensitive keypads.
- RS232 interface available.
- Separate vacuum and vent ports: the narrow vent line controls the vacuum rate and inert (wider the vacuum line, the faster the vacuum is produced).
- Tight gasket seal and push-button latch.
- Block type heater distributes heat evenly from the chamber exterior to be anodized.
- Heat tempered spring load glass door gives a tight vacuum seal and convenient for continuous monitoring of samples.
- Moderately sized oven with user-friendly all-in-one control panel.
- Upon request available with Viton (fluorine rubber) door gasket. (optional)

Introduction
Townson and Mercer XF vacuum oven from Wolflabs. A highly versatile range of compact vacuum ovens. These vacuum ovens enable heat sensitive materials to be dried at low temperature. 

Features and benefits
- Designed to operate up to 200°C (300°C option)
- Four sizes: 20l, 50l, 120l and 240 litres
- Temperature time fluctuation: less than ±0,2°C
- Final vacuum until 10-6mBar

Introduction
Binder VDL series of vacuum ovens from Wolflabs. Vacuum drying chambers for flammable solvents.

Features and benefits
- Temperature range: room temperature plus 15 °C to 200 °C
- ATEX compliance chamber's interior: Ex II -/3G c IIB T3-T1 Gc X
- APT.line™ preheating chamber technology
- Controller with time-segment and real-time programming
- 2 aluminum expansion racks
- Inert gas connection
- Shatterproof, spring-mounted safety glass panel
- Pressurized instrument panel with compressed air connection
- Pressure control device for heating activated < 125 mbar}
- Flame protection gasket
- Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
- Computer interface: RS 422

Discounts of almost 20% - http://www.wolflabs.co.uk/laboratory-products/ovens-vacuum

New XFM and XFL vacuum ovens from Townson and Mercer have been added.

Discounts of almost 20% - https://www.wolflabs.co.uk/laboratory-products/ovens-vacuum

Vacuum oven Binder VD23, capacity 23l, maximum temperature 200°C not suitable for flammable solvents, digital control, internal dimensions 285h x 285w x 285d mm
Vacuum oven Binder VD53, capacity 53l, maximum temperature 200°C not suitable for flammable solvents, digital control, internal dimensions 400h x 400w x 330d mm

Introduction
Townson & Mercer XFM120 vacuum oven from Wolflabs. The XFM120 vacuum oven is suitable for sensitive product drying applications, outgassing, thermal treatments of oxidazable materials and the quick drying of powders and granulates. 

Features and benefits
- Robust construction for lasting performances.
- Reliable temperature on your products.
- Easy temperature measurements.
- Easy loading and unloading.

Introduction
Townson & Mercer XFL512 vacuum oven from Wolflabs. This oven is suitable for sensitive product drying applications, outgassing, thermal treatments of oxidizable materials and the quik drying of powders and granulates.

Features and benefits
- High-performance heating.
- Accurate temperature control.
- Work safely.
- Easy loading and unloading.
- Reliable vacuum control. 

Introduction
Binder VDL23 vacuum oven from Wolflabs.

Features and benefits
- Fast and gentle drying.
- Direct heat transfer through large thermal conducting plates.
- Safe work with one-of-a-kind safety concept.
- Coordinated, modular system with vacuum pump and vacuum module.

Introduction
Jeiotech OV-11 vacuum oven from Wolflabs.

Features and benefits
- Intuitive control panel with bright LED displays.
- Dual wait on/off timer modes.
- Heat tempered glass window provides clear inside view of the chamber.
- Convenient pre-setting function for three most commonly used temperature settings.
- Keypad lock function prevents accidental changes during operation.
- Automatic run after power interruption.

New VD and VDL vacuum ovens from Binder have been added.

Introduction
Townson & Mercer 1445-2 vacuum oven from Wolflabs.

Features and benefits
- Precise temperature stability and uniformity.
- Touchpad control panel provides easy parameter set up.
- Setpoint and actual chamber temperatures digitally displayed.
- Chamber door is vented. 

New SVAC1-2, SVAC2-2 and SVAC4-2 vacuum ovens have been added.

New OV4-30 and OV4-65 vacuum ovens from Medline Scientific have been added.