More manufacturers

Analox

Laboratory products from this manufacturer

Products from this manufacturer Number of products

Monitors - Gas

4 products >
AP1  Ax60+
ASPBA01YU01  Aspida
ASPBB02YU01  Aspida
ASPBC03YU01  Aspida

Other laboratory products -

391 products >
AX1BK10X55Q1Y01  Analox O2NE+ Oxygen Depletion Safety Monitor Including Alarm Repeater And Relay On 2nd Alarm - UK Plug (GAS1302)
REP1QXX01  Analox Additional Alarm Repeater For Additional Entrances (GAS1304)
AX1BK20X55Q2Y51  Analox Safe-Ox+ Oxygen Enrichment And Depletion Safety Monitor Including Alarm Repeater And Relay On Both Alarms - Uk Plug (GAS1312)
AX1BK20X11Q2Y51  Analox Safe-Ox+ Oxygen Enrichment And Depletion Safety Monitor Including Alarm Repeater And Relay On Both Alarms - EU Plug (GAS1310)
AX1BK10X11Q1Y01  Analox O2NE+ Oxygen Depletion Safety Monitor Including Alarm Repeater And Relay On 2nd Alarm - EU Plug (GAS1300)
ANA004-CARR01  Carriage cost Analox
P0159-4120-EN  Signage pack Analox Sensor Technology CO2 contains 1 x ”What to do” sign for use with the Central Unit, 1 x CO2 Sensor warning label and 1 x CO2 Alarm label. All labels are professionally printed.
1558-5200  Quick connect cable Analox Sensor Technology 15m
1817-5000  Sub MkIIIF replacement neoprene tubing per metre.
1K0SWITCHKIT  1000 Series replacement switch kit. Kit includes switch replacement tool, mute button switch and cap, on/off toggle switch, hi/lo toggle switch and hi/lo res toggle switch.
2533-1005  Power supply filter for bridge & deck zone use (Lloyds test spec 1 compliance).
2533-1008  Inline particulate filter.
2533-1499  1000 Series mains power filter (clamp connector).
2553-0015  Beacon Analox Sensor Technology Blue xenon, low power
2557-0005  For ADM, Aspida, HBOT & Sub - Rechargeable NmHi power cell.
2557-1237  Spare dry cell battery (this part number is for one battery, 4 required per unit).
2557-1268  1000 Series battery pack.
2557-1855  HYP 9V PP3 Battery for HYP, 100 HYP III, G11-4 & O2 Portable. *MOQ5*
2557-4625  Pressure tested ‘D’ cells. *MOQ16*. NSN 6135-008357210.
2562-0008  Combined beacon/sounder, 24 V DC, IP65.
2822-0019A  Sub MkIIIF universal in line power adaptor 24V 65W.
2822-0035  ADM replacement universal PSU, 90-264VAC to 9VDC, DC jack plug, 2.1mm x 5.5mm x 12mm, centre pin positive.
2822-0035A  For Aspida/Sub Aspida - 9V DC Universal Plug & Charger
2822-0050  Power supply Analox Sensor Technology hard wired with flying leads
2833-2150  Multi turn dial.
2836-1200B  Manifold case - black small.
2836-1600Y  Pelicase - yellow large.
5981-0502  5001 flowmeter.
5K1-420  5001 spare front panel (not USN version or G30).
6000-0094EXC  ACG water sensor service swap out (excludes freight).
6000-0096  VOC in-line filter (6mm inlet/outlet).
6000-0164  Mini 300 piston sensor pressure regulator.
6000-0197K  DIN Restrictor Kit (includes DIN flow restrictor, flow meter and 1m of tubing).
6000-0201  Inlet/calibration adaptor.
8000-0002A  High pressure DII adaptor.
8000-0011GA  Flow adaptor.
8000-0075A  ATA flow adaptor. NSN: 6630-99-312-4515.
8000-0910A  Adaptor Analox Sensor Technology push in, 2 tube
8000-1019  1000 spare front panel for combined paramagnetic.
8000-9008  Splashguard Analox Sensor Technology
9100-1004  Replacement sensor for Analox 3D and Domnick Hunter 30/50.
9100-1004P  Carbon monoxide sensor - 0-100ppm and 0-30ppm.
9100-1020RK  For Aspida & HBOT - Replacement O2 sensor and extraction kit.
9100-1021  Replacement O2 cell for use in nitrogen environments. NSN: 6515-995986712.
9100-1060RK  For ADM & Sub - Replacement O2 sensor and extraction kit.
9100-1250  Replacement O2 cell for Analox 1 and helium versions of the O2NE and Safe-ox. Replaces the now obsolete 9100-1200A. Not be used for underwater applications such as re breathers.
9100-1700A  EIICO replacement carbon monoxide sensor.
9100-2001  1000 Series B1 fast response oxygen cell.
9100-2002  1000 Series C3 long life oxygen cell. NSN 6625-993215237.
9100-2030A  Replacement CO sensor assembly for CO Clear.
9100-2030S  MEC CO cell (electrochemical) including gasket
9100-2060/ES  Disposable electrode stack.
9100-2060/LP  10.6 Ev replacement lamp.
9100-2060/SP  Replacement spring.
9100-2060S  MEC VOC cell (PID).
9100-3500  Gastec airtec tube (oil mist) 109A, pack of 10.
9100-3501  Drager oil impacter 8103530, pack of 10.
9100-4535  Replacement helium sensor. NSN: 6515-99-613-4282.
9100-4535P  8000 helium cell.****Note - this cannot be replaced by the user. The unit must be returned to Analox****
9100-9150  SubMkIIIF 35Bar spare pressure sensor.
9100-9212-2  1000 Series oxygen 9212-2 cell (%).
9100-9212-3  1000 Series oxygen 9212-3 cell (%).
9100-9212-4  Replacement O2 sensor including hard wired lead with jack plug. NSN 6515-992509337. MOD 6630 99 786 7443
9100-9212-5AD  Replacement oxygen cell. NSN: 6515-99-K02-4558.
9100-9212-5H  Spare O2 cell for HYPO2 and spare O2 cell for 100 HYP III. 0-2bar Version. NSN 6630-99-786-9120.
9100-9212-9  O2 sensor with screw thread and molex connector - only for use in UBS Mini O2 version. NOTE: this sensor is not suitable for a standard Portable Oxygen Monitor.
9100-9212-94  Replacement oxygen sensor. NSN 6515-99-463-8562.
9100-9212-94P  8000-9000 O2 sensor.
9100-9212-9H  Spare O2 cell for 100 HYP III. 0-2000mbar Version Only.
9100-9212-9H3  Sub MkIIIF 0-3000mbar O2 sensor.
9100-9212-9HG  1000 Series oxygen 9212-9HG cell (ppO2).
9100-9212-9HM  Replacement O2 cell for O2 MEC sensor module.
9100-9212-9HSUB  1005 & MkII replacement O2 sensor. NSN 6515-992462611.
9100-9212-9HSUBA  0-2000mbar O2 sensor.
9100-9212-9HSUBMRC  Replacement O2 sensor for MRC MkII.
9100-9220-9B  Replacement oxygen sensor for EII Pro and O2EII. NSN: 6515-99-148-5260.
9300-1008K  For Aspida, HBOT, ADM & Sub - Download kit, comprising: 1 x software disk, 1 x USB lead.
9300-1009K  For Aspida, HBOT & Sub - Wall mount clip.
9300-1010  For Aspida, HBOT & Sub - Leather belt clip with press-stud fastner.
9300-1016  1000 Series trim tool.
9300-1020  30mm open ended spanner.
9300-1021  VOC electrode stack removal tool.
9300-1022  VOC lamp cleaning kit. NSN # 6665-99-843-1945.
9300-1500  BCD low pressure inflator flow restrictor.
9300-4000  Check gas adaptor.
9300-4010  Bench power supply universal.
9300-4025  USB communications lead.
9300-4050  Operator familiarisation DVD.
9300-5004  8M cable for daisychain repeater.
9300-5010  8M repeater extension cable.
9300-5500  Inline coupler Analox Sensor Technology RJ45
9300-5600  T-adaptor Analox Sensor Technology modular (f)
A50CHECKKIT  Comprising:- 1 x 12l can test gas 0.7% CO2 in N2 1 x 12l can test gas 1.7% CO2 in N2 1 x fine control valve 1 x flow adaptor 1m tubing
A5S3ALN6G  0-10000ppm, 0.2 - 2V output, for use in 5001's.
A5S3ASH8K  Spare 5S3 CO2 sensor for 1005 REM 0-5000ppm in He (RS485 output).
A5S3ASN4S  0-5000ppm, 4-20mA, OEM.
A5S3ASN6G  0-5000ppm, 0.2 - 2V output, for use in 5001's.
A5S3ASN8A  5S3 CO2 full sensor module.
A5S3BBN4S  0-2%, 4-20mA output, OEM.
A5S3BBN7S  0-2%, 0 - 2V output, OEM.
A5S3BBN9S  0-2%, CO2, 0.1 - 1V output.
A5S3BCN4S  0-5%, 4-20mA output, OEM.
A5S3BCN7S  0-5%, 0 - 2V output, OEM.
A5S3BDN4S  0-10%, 4-20mA output, OEM.
A5S3BDN7S  0-10%, 0 - 2V.
A5S3BGN4S  0-100% CO2, 4-20mA output, OEM.
A5S3BGN7S  0-100% CO2, 0 - 2V output, OEM.
A5S3BNN4S  0-20%, 4-20mA output, OEM.
A5S3BNN7S  0-20%, 0 - 2V output, OEM.
ACG+12MS  12 monthly service for ACG+ comprising:• Replacement of the PID Lamp• Replacement of the internal particulate filter• Replacement of the internal charcoal filter• Complete with PID sensor electrode stack removal tool
ACG+24MS  24 monthly service for ACG+ comprising:• Replacement of the PID Lamp• Replacement of the internal particulate filter• Replacement of the internal charcoal filter• Replacement of the O2 MEC module oxygen cell• Replacement of the CO MEC module carbon monoxide cell• Replacement of the water vapour sensor• Replacement of all flow adaptor orings• Complete with PID sensor electrode stack removal tool
ACG+6MS  6 monthly service for ACG+ comprising:• Replacement of the PID Lamp• Replacement of the internal particulate filter• Complete with PID sensor electrode stack removal tool
ACG+N2CALKIT  ACG+ calibration kit for nitrogen backgrounds comprising:1 x 110L 8% oxygen, balance nitrogen, 1 x 110L 18ppm CO, 18ppm isobutylene, 20.9% O2, 900ppm CO2, balance N2, 1 x 0.5 lpm flow regulator, 1 x ACG+ calibration inlet adaptor, 1 Metre of flexible hose.
ACGEXTPSU  External supply for fixed variant only (side gland connection - gland and key switch kit required). NSN # 6130-99-290-5150.
ACGPAAAAAXX  ACG+ Analyser. Range: 0-50% O2, 0-1000ppm CO2, 0-20ppm CO, 0-20ppm VOC and Water Vapour NSN # 6665-99-590-5726.
ACGPAAAAAYX  ACG+ Analyser, CO2, O2, CO, VOC, water vapour, Ethernet option included.
ACGPAAAAXXX  ACG+ Analyser. Range: 0-50% O2, 0-1000ppm CO2, 0-20ppm CO and 0-20ppm VOC.
ACGPAAXAAXX  ACG+ Analyser. Range: 0-50% O2, 0-1000ppm CO2, 0-20ppm CO and water vapour
ACGPAAXAXXX  ACG+ Analyser. Range: 0-50% O2, 0-1000ppm CO2, 0-20ppm CO.
ACGPEXTPSU  External power supply for fixed or portable (front panel connection). NSN # 6130-99-907-1799.
ACGSDA/1  ACG+ Display Module - configured for CO2, O2, CO, VOC and water vapour.
ACGSDA/2  ACG+ Display Module - configured for CO2, O2, CO and VOC.
ACGSDA/3  ACG+ Display Module - configured for CO2, O2, CO and water vapour.
ACGSDA/4  ACG+ Display Module - configured for CO2, O2 and CO.
ADMABCDEPG01X  Dual CO2/O2 ADM, panel mount, 0-5% CO2, 0-100% O2, universal AC-DC mains adaptor.
ADMABCXXPG01X  Single O2 ADM, panel mount, 0-100% O2, universal AC-DC mains adaptor.
ADMXXXDEPG01X  Single CO2 ADM, panel mount, 0-5% CO2, universal AC-DC mains adaptor.
APK  Ax60K1 x Ax60K CO2 Sensor Unit,1 x Ax60 Alarm Unit (Blue Strobe),Quick Connect with Universal Power Supply.
AS2F-660  Sub MkIIF Rem 2 T&H module.
ASF310051XREM3  1005 System Display Control Module and 1 x REM.
ASF310052XREM3  1005 System Display Control Module and 2 x REMs.
ASF310053XREM3  1005 System Display Control Module and 3 x REMs.
ASF3AAGJCYY  Diving system. Sub MkIIIF with REM1 & REM2, 0 to 1500mBar ppO2, 0.00 to 20.00 mBar ppCO2 in He, 0.00 to 350.0 MSW, 0.0 to 50 DegC, 0 to 100% RH, 24VDC, relays and 4-20mA output. Main operator console is designed for incorporation into a panel.
ASF3AAGJXXY  Diving system. Sub MkIIIF with REM1, 0 to 1500mBar ppO2, 0.00 to 20.00 mBar ppCO2 in He, 0.00 to 350.0 MSW, 24VDC, relays and 4-20mA output. Main operator console is designed for incorporation into a panel.
ASF3AEDACYY  Hyperbaric oxygen therapy (HBOT) or air chamber or underwater habitat. Sub MkIIIF with REM1 & REM2, 0-3000mBar ppO2, 0.00 to 20.00 mBar ppCO2, 0.80 to 10.00 bara, 0.0 to 50DegC, 0 to 100% RH, 24VDC, relays and 4-20mA output. Main operator console is designed for incorporation into a panel.
ASF3AEDAXXY  Hyperbaric oxygen therapy (HBOT) or air chamber or underwater habitat. Sub MkIIIF with REM1, 0 to 3000mBar ppO2, 0.00 to 20.00 mBar ppCO2, 0.80 to 10.00 bara, 24VDC, relays and 4-20mA output. Main operator console is designed for incorporation into a panel.
ATAPROAYYA  ATA Pro Trimix Analyser.
AX60CDSNYA  Ax60+ Central Display Unit, Hard Wired,Flying leads, no cable, includes beacon (2553-0015)
AX60CNQNXA  Ax60+ Kiosk Calibration Tool (Central Display Unit), Quick Connect, no cable
AX60CO2CALKIT  Calibration Kit Analox Sensor Technology CO2 for Ax60+ (For 3% CO2 range instruments): 110L 100% N2, 110L-3%CO2/N2, Regulator, Neoprene Tubing, Push in adaptor.
AX60CO2CHECKKIT  Alarm Check Kit Analox Sensor Technology CO2 for Ax60+ (For Alarms of 1.5% and 3.0%): 110L 1.60% CO2, balance N2, 110L 3.2% CO2, balance N2, Regulator, Neoprene tubing, Push in adaptor.
AX60CO2O2CALKIT  Calibration kit Analox Sensor Technology CO2 & O2 for AX60+ (For 3% CO2 range instruments): 110L 100% N2, 110L-3%CO2/N2, 110 Pure Air 110 Litre Pure Air , Regulator, Neoprene Tubing, Push in adaptor.
AX60CO2O2CHECKKIT  Alarm check kit Analox Sensor Technology CO2 & O2 for AX60+ (For CO2 Alarms of 1.5% and 3.0%): 110L 1.60% CO2, balance N2, 110L 3.2% CO2, balance N2, 110L 100% N2, 110L 23.5%O2 BAL N2+/- 2% TOLERANCE, Regulator, Neoprene tubing, Push in adaptor. 865.00
AX60CUQYXA  Ax60+ Central Display Unit, Quick Connect, Uni PSU, inc cable.
AX60CUSYXA  Ax60+ Central Display Unit, Hard Wired Connection, Uni PSU included, cable gland entry supplied (Installer to fit if required).
AX60O2CALKIT  Calibration Kit Analox Sensor Technology O2 for Ax60+ (For 25% O2 range instruments): 110L 100% N2, 110L Pure Air, Regulator, Neoprene tuning, Push in adaptor. 562.00
AX60O2CHECKKIT  Alarm Check Kit Analox Sensor Technology O2 for Ax60+ (For Low going Alarms of 18% and 19.5% and high going alarm of 23%): 110L 100% N2, 110L 23.5% O2 balance N2, Regulator, Neoprene tubing, Push in adaptor. 562.00
AX60OMQANA  Data Output Module Analox Sensor Technology Ax60+, quick connect
AX60OMSANA  Data Output Module Analox Sensor Technology Ax60+, hard wired
AX60RQNBA  1 x Ax60K Alarm (Blue Strobe), Quick Connect.Note: If you buy this spare alarm you require a 9300-5600 T-adaptor.
AX60RQYAA  Alarm Analox Sensor Technology Ax60+, quick connect, red strobe, includes cable
AX60RQYBA  Alarm Analox Sensor Technology Ax60+, quick connect, blue strobe, includes cable
AX60RQYCA  Alarm Analox Sensor Technology Ax60+, quick connect, white strobe, includes cable
AX60RQYDA  Alarm Analox Sensor Technology Ax60+, quick connect, amber strobe, includes cable
AX60RSYAA  Alarm Analox Sensor Technology Ax60+, hard wired, red strobe, includes cable
AX60RSYBA  Alarm Analox Sensor Technology Ax60+, hard wired, blue strobe, includes cable
AX60RSYCA  Alarm Analox Sensor Technology Ax60+, hard wired, white strobe, includes cable
AX60RSYDA  Alarm Analox Sensor Technology Ax60+, hard wired, amber strobe, includes cable
AX60SAQNK  1 x Ax60K CO2 Sensor Unit, Quick Connect, Inc Power supply.
AX60SAQYA  Sensor unit Analox Sensor Technology CO2 for Ax60+, quick connect, includes cable
AX60SASYA  Sensor unit Analox Sensor Technology CO2 for Ax60+, hard wired, includes cable
AX60SCQYA  Sensor unit Analox Sensor Technology O2 for Ax60+, quick connect, includes cable
AX60SCSYA  Sensor unit Analox Sensor Technology O2 for Ax60+, hard wired, includes cable
CALIBRATIONBANDA  SDA Range, 3000 Range, 1000 series
CALIBRATIONBANDB  ATA Pro, Aspida, 101D2, 5S3, A50, Ax60+, CO Clear, HYP, Portable O2, O2NE+
CERTIFICATE  Full test certificate
DD11005REM  Spare Remote Sensor Unit (REM).
DD1F39BJ89N002  Hyper-Gas MkII Hydrocarbon Bell Monitor.
DD1F39BJ89N003  Topside repeater for use with Hyper-Gas MkII.
DD1F39BJ89N004  Bell monitor case and electronics, no manifold. **Discussion recommended**
EIIPAYYA  O2EII Pro portable nitrox checker with LCD display and a BCD dome adaptor.
EUROPEAN C OF O  European Certificate of Origin
F3R1AAAY  Rem 1 0 to 1500mbar ppO2, 0.00 to 100.00 mbar ppCO2 in N2 and 0.80 to 10.00 bara pressure (example only).
F3R1ADAY  REM1 for an SRV system 0 to 1500mbar ppO2, 0.00 to 20.00 mbar ppCO2 in N2 and 0.80 to 10.00 bara pressure (example only).
F3R1AGJY  SUBMKIIIF REM1: 0-20mBar/He, 0-1500mBar Po2, 0-350MSW
F3R1EDAY  REM1 for an HBOT System 0 to 3000mbar ppO2, 0.00 to 20.00 mbar ppCO2 in N2 and 0.80 to 10 bara pressure (example only).
F3R2CYY  REM2 for use in all systems 0.0 to 50.0 deg C and 0 to 100% RH humidity (example only).
F3R2FYY  Rem 2 32.0 to 122.0 deg F and 0 to 100% RH humidity (example only).
F3R3AXAY  REM3 for use in the O2 Controller only 0 to 1500mbar ppO2 and 0.80 to 10.0 bara pressure with oxygen injection controller (example only).
FSUB-607  Sub MkIIIF spare cable DCM to REM1 or REM2.
FSUB-608  Sub MkIIIF spare cable REM2 to REM1.
FSUB-609  Sub MkIIIF spare cable DCM to terminal.
GAS357  Rubber tube holder for colourmetric tubes.
HC2REPBUZZ  Replacement buzzer assembly for the Hyper-Gas Bell Monitor.
HC2REPMUTE  Replacement mute button assembly for the Hyper-Gas Bell Monitor.
HYPERSERV  6 Monthly Service of Hyper-GasMkII manifold. Including fitting newpump, replacing drying dessicant,filter replacement and calibration ofhydrocarbon sensor.
HYPERSERVB  6 Monthly Service of Hyper-Gas MkIImanifold. Including fitting new pump,replacing drying dessicant, filterreplacement and replacement andcalibration of hydrocarbon sensor.
HYPERSERVFB*  6 Monthly Service of Hyper-GasMkII manifold. Including fitting newpump, replacing drying dessicant,filter replacement and replacement(under warranty) and calibration ofhydrocarbon sensor.
MECCOBBAP  OEM MEC carbon monoxide (CO), 0-20ppm in N2, 150mm Lead, Plastic Enclosure.
MECCOBBBP  MEC Carbon monoxide sensor module 0-20ppm.
MECCOEBAP  MEC CO full sensor module.
MECO2ABAP  MEC O2 full sensor module.
MECO2ABBP  OEM MEC oxygen (O2), 0-3000mbar O2, 150mm Lead, Plastic Enclosure.
MECVOCBAP  MEC VOC full sensor module.
MIO2HO  Replacement tubing (per metre). NSN: 6630-99-878-8706.
MIO2OR  Spare O ring (pack of 2).
MIRAGNX4S  Sub MkIIIF 0-20mbar MIR CO2 sensor in N2.
MIRASHX4S  Sub MkIIIF 0-20mbar MIR CO2 sensor in He.
MIRDJNX4S  Sub MkIIIF 0-100mbar MIR CO2 sensor in N2.
MO2-417A  Push in flow adaptor (included in calibration tool kit).
MO2-422  Spare dome adaptor.
MO2-475  O2EII Pro push in domed adaptor including barbed spigot.
MO2BGYY01  Portable Oxygen Monitor complete with long life cell and both the standard flow adaptor and the domed flow adaptor/restrictor. Range 0-100%.
MO2BGYY02  Portable Oxygen Monitor for use with welding includes sample draw kit.
MO2HBYY03  HYP Portable Partial Pressure Oxygen Monitor. *MOQ10*
MODIFICATION  Modifications labour charge per hour
OS+RELAY  Single relay for O2NE+ & Safe-Ox+.
OS+TWINRELAY  Twin relay option for O2NE+ & Safe-Ox+.
P0075-615  Wall mounting fixing kit. NSN # 5340-99-731-3205.
P0120-403P  Pack of 30 spare calibration gaskets for O2NE+ & Safe-Ox+. **For O2NE+ and Safe-Ox+ manufactured before November 2016.**
P0120-651K  Flow adaptor kit for calibration (flow adaptor with gasket, 1m of tubing & 2 spare gaskets). **For O2NE+ and Safe-Ox+ manufactured before November 2016.**
P0120-660K  Flow adaptor kit for calibration (flow adaptor, 1m of tubing).
P0132-401K  ADM optional bracket set (to replace ties and tie bases), inc 2 x brackets, 4 x M4x6mm pozi pan screws and 4 x M4 split washers.
P0132-602  ADM fixing kit.
P0132-603  ADM Aspida battery backup.
P0149-605LS  Spare lithium-ion battery. NSN # 6140-99-155-2148.
P0149-605LU  ACG+ Li-Ion Battery & Charger Kit, Universal Plug
P0149-605NS  Spare nickel metal hydride battery. NSN # 6140-99-396-2995.
P0149-605NU  ACG+ NiMH Battery & Charger Kit, Universal Plug
P0149-610  Gland and override key switch kit.
P0149-611  External flow meter sample support kit.
P0149-612  Colourmetric tuber restrictor kit (for 01.l/m flow).
P0149-613  Humidifier kit.
P0159-4150-EN  Signage Pack Analox Sensor Technology O2 contains 1 x ”What to do” sign for use with the Central Unit and 1 x O2 Alarm label. All labels are professionally printed.
P0159-4305K  Protector kit Analox Sensor Technology includes protector bar, splashguard & fixing kit.
PGA-401DK  For Aspida, ADM, HBOT & Sub - Dual calibration adaptor.
PGA-401SK  For Aspida, ADM, HBOT & Sub - Single calibration adaptor.
PGA-607  For Aspida, HBOT & Sub - 9V DC car charger.
PGA-611  Aspida ADM HBOT CO2 calibration gas kit, comprising: 1 x 12 litre 3% CO2 in N2, 1 x 20 litre 100% N2, 1 x fine control valve and tubing.
PGA-613  For Aspida & HBOT - Sample draw kit for dual Aspida inc: 1 x universal flow adaptor, 1 x aspirator bulb, 1 x rubber tubing, 1 x stainless steel probe.
PRESCAL  Factory calibrationwith certified zero andspan gases. Pressure,temperature andhumidity calibration.Includes calibrationcertificate.
PSA-612  Aspida Sub1 x 20 litre 21% Oxygen balance Nitrogen,1 x 20 litre 100% Nitrogen,1 x Fine control valve and tubing.
REP1CXX01  O2NE+ and SafeOx+ quick connect repeater (Daisy Chain)
REP1HXX01  O2NE+ and SafeOx+ hard wired repeater with 8m cable and mm connector.
REP50CXX01  Daisychain quick connect repeater with 8m cable and mm connector.
REP50CYX01  Daisychain quick connect repeater with O2 LED with 8m cable and mm connector.
REP50HXL01  Daisychain hard wired repeater with 8m cable and hi intensity strobe LED’s.
REP50QXL01  Daisychain quick connect repeater with 8m cable and hi intensity strobe LED’s.
REPAIR  Repairs labour charge per hour
SA1HAT690  Sub MkIIIF spare temperature & humidity sensor for SubMkIIIF REM2.
SA1J01BG70N861  101D2 Portable Oxygen Monitor. NSN 6630 99K01 6809.
SA1J01BGXXN861  101D2 instrument (no cell).
SA1P01X1111S  1000 Series 1111 paramagnetic sensor.
SA1P16RH  1000 Series RH capsules 0% & 75%.
SA1S01NA32N001  1000 series 9205B housing with flying leads (instrument must be configured to accept these housings). (B1 Sensor not included).
SA1S01NA33N001  1000 Series 9205C housing with flying leads (instrument must be configured to accept these housings). (C3 Sensor not included).
SA1S01NA35N001  9206C housing (jack plug connection, only suitable for older units configured to take a B1 or C3 oxygen sensor).
SA1W75SR60N541  Sub MkIIP 8-40VDC. 0-10% SEV CO2, 0-2 ATA pp, FSW and °F
SA1W75SR60N541C  Sub MkIIP 9-40VDC. 0-10% SEV pp CO2, 0-200% SEV pp O2, 0.8-10 BarA and 0-40°C, with data logging. NSN 6630 99 811 2621.
SA1W75SR60N561  Sub MkIIP 8-40 VDC. 0-10% SEV CO2, 0-2000mB O2, MSW and °C, with data logging.
SA1W75SR60N564  Sub MkIIP 8-40VDC. 0-10% SEV pp CO2, 0-200% SEV pp O2, 0-300 FSW and 32-104°F, with data logging. NSN 6630 01 532 7090.
SA1W75SR60N571  Sub MkIIP 8-40VDC. 0-10% SEV CO2, 0-2000mB O2, MSW and °C.
SA1W75SR60N581  Sub MkIIP 8-40VDC. 0-10% SEV CO2, 0-2 ATA pp, FSW and °F, with data logging.
SA2A0LEAD  1000 Series UK power lead.
SA2A0LEADUSA  1000 Series US power lead.
SA2ATACASE  Peli-box with foam insert to house ATA. NSN: 6630-99-958-5670.
SA2EIIMINICASE  EII peli-box with foam insert to house, store and protect your O2EII, accessories, and spares with this tough, protective box. (Does not include analyser or spares).
SA2HC603A  power and comms connecting cable for connection between the Bell Monitor and the Topside Repeater
SA2HGDATA  Data download disc.
SA2W75UNIPOWER  MkIIP Universal power cable.
SA2W75USPOWER  MkIIP US power cable.
SA7EIICOTOOLKIT  Calibration tool kit: comprises of trimming tool, T10 torx screwdriver, push in flow adaptor, calibration tutorial DVD and USB stick, technical manual and flow indicator and tubing.
SA7FLOWIN  Flow indicator & tubing (included in calibration tool kit).
SA7FLOWINTUBING  Tubing. 1 required for each regulator. NSN 4720-99-598-7918.
SA7L10501  110 litre calibration gas. 100% nitrogen.
SA7L11009  O2NE+ & SafeOx+ - 110 litre pure air calibration gas.
SA7L110165  SafeOx+ - 110 litre high alarm check gas, 23.5% O2 in N2.
SA7L110173  Calibration gas (nitrogen balance).
SA7L110174  Zero gas.
SA7L110403  110 litre 5% Propane in balance Nitrogen. (Disposable cylinder). NSN 6830-99-180-3830.
SA7L1109103  110 litre 2% Carbon dioxide in balance Nitrogen. NSN 6830-99-272-3152
SA7L2001  12 litre 100% N2.
SA7L2003  12 litre 21% O2 in N2
SA7L2009  12 litre 21% O2 Bal Helium. MOQ of 6
SA7L20103  12 litre 0.5% CO2 in N2.
SA7L20104  12 litre 1% CO2 in air.
SA7L20110  12 litre 10ppm CO in air.
SA7L20111  12 litre 50ppm CO Bal N2.
SA7L2013  12 litre 5% CO2 in air.
SA7L20135K  Sub Mk III F Cal Kit12L 2.5% CO2 in He Tol +/-5%,Flow Indicator for 20L cans,Neoprene tubing,Flow adaptor.
SA7L20149  12 litre 20ppmCO in air.
SA7L20151 **MOQ6  12 litre 11ppm CO, 21% O2.
SA7L20153K  CO Clear (Air/Mixed Gas)12 litre 20.9% O2 in N2,12 litre 10ppm CO/20.9% O2 in N2,1 x fine control valve.
SA7L20154 **MOQ6  12 litre 10ppm CO, 21% O2.
SA7L20154K  CO Clear (Heliox)12 litre 20.9% O2 in He,12 litre 10ppm CO/20.9% O2 in He.1 x fine control valve.
SA7L2023  12 litre 2.5%CH4 in air.
SA7L705XFLIND  Calibration bottle regulator.
SA7O2NE+CALCHK  Calibration and alarm check gas kit for Analox O2NE+ instruments comprising:1 x 110 litre can calibration gas with pure air (20.9% oxygen in nitrogen)1 x 110 litre can check gas with 100% nitrogen1 x 0.5 litre/m flow regulator
SA7O2NE+CHK  Alarm check gas kit for Analox O2NE+ instruments comprising:1 x 110 litre can check gas with 100% nitrogen,1 x 0.5 litre/m flow regulator.
SA7OS+CAL  Calibration gas kit for Analox O2NE+ and Safe-Ox+ instruments comprising:1 x 110 litre can calibration gas with pure air (20.9% oxygen in nitrogen),1 x 0.5 litre/m flow regulator.
SA7OSREGKIT  58/110L regulator kit for O2NE+ & Safe-Ox+ comprising:1 of 0.5l/m regulator to fit 58/110L calibration gas bottles. (flow adaptor suitable for units manufactured from August 2016 & neoprene tubing)
SA7SAFE-OX+CAL  Alarm check gas kit for Analox Safe-Ox+ instruments comprising:1 x 110 litre can check gas with 100% nitrogen,1 110 litre can check gas with 23.5% oxygen balance nitrogen.1 x 0.5 litre/m flow regulator.
SA7SAFE-OX+CALCHK  Calibration & alarm check gas kit foe safe-ox+ instruments comprising:1 x 110 litre can calibration gas with pure air (20.9% oxygen, balance nitrogen),1 x 110 litre can check gas with 100% nitrogen,1 x 110 litre can check gas with 1 x 110 litre 23.5% oxygen balance nitrogen,1 x 0.5 litre/m flow regulator.
SA8HYGMKIIMAN  Replacement manifold for Hyper-Gas MkII.
SAACAAAU01A  Analox Sub Aspida: 0-5% CO2, 0-100% O2, Uni PSU/Charger, Belt Clip
SAACAAAU01B  Analox Sub Aspida: 0-5% CO2, 0-100% O2, Uni PSU/Charger, Wall Mountable
SABCBAAU01A  Analox Sub Aspida: 0-5% CO2,0-1200mBar ppO2, Uni PSU/Charger, Belt Clip
SABCBBBU01A  Analox Sub Aspida: 0-50mBar ppCO2,0-1200mBar ppO2, Uni PSU/Charger, Belt Clip
SAEPAS2F613  Sub MkIIF spare cable from panel to REM.
SAEPAS2F614  Sub MkIIF spare cable from REM1 to REM2.
SAEPHC2603  Bell monitor or topside repeater installation kit.
SDACBBNXA  SDA monitor and CO2 module, combined panel, configured for CO2 5000ppm 24V DC, Analox.
SDACBBNYA  SDA monitor & CO2 module, combined panel, configured for CO2 5000ppm, 24V DC, Analox with data logging.
SDACBDNXA  SDA monitor & CO2 module, combined panel, configured for CO2 0-2%, 24V DC, Analox.
SDACBDNYA  SDA monitor & CO2 module, combined panel, configured for CO2 0-2%, 24V DC, Analox with data logging.
SDAFMPANEL  SDA Flow meter on panel mount plate, with O2 label.
SDAFMRACK  SDA Flow meter on 1/4 rack, 3U plate.
SDAMONCON  SDA Phoenix connector Pack.
SDAOMCURRENT  4-20mA output module with 2 off relays. (Connects to serial data output on SDA module).
SDAPAAXXAXXX  SDA O2 Panel mount, 0.0 to 100% O2, Analox (includes MEC O2 Sensor module).
SDAPAAXYAXXX  SDA O2 Panel mount, 0.0 to 100% O2, Analox with data logging (includes MEC O2 Sensor module).
SDAPAEXXAXXX  SDA O2 panel mount 0-3000mbar ppO2 (includes MEC O2 Sensor module).
SDAPAEXYAXXX  SDA O2 Panel mount 0-3000 mbar ppO2, 24V DC, with data logging (includes MEC O2 Sensor module).
SDAPBBNXA  SDA monitor & CO2 module, panel mount, 0 to 5000ppm.
SDAPBBNYA  SDA monitor & CO2 module, panel mount, 0 to 5000ppm with data logging.
SDAPBDNXA  SDA monitor & CO2 module, panel mount, 0 to 2%.
SDAPBDNYA  SDA monitor & CO2 module, panel mount, 0 to 2% with data logging.
SDAPCFNXA  SDA CO Air: panel mount, 0-20ppm CO in nitrogen.
SDAPCFNYA  SDA CO Air: panel mount, 0-20ppm CO in nitrogen with data logging.
SDAPCO2ASN  0-5000ppm SDA CO2 panel module atmospheric pressure compensated includes flow meter (calibrated on nitrogen).
SDAPCO2BBN  0-2% SDA CO2 panel module atmospheric pressure compensated includes flow meter (calibrated on nitrogen).
SDAPDGXXA  SDA Monitor & T&H probe (Chamber version), panel mount configured for 0-100degC, 0-100%RH, 24V DC.
SDAPDGXYA  SDA Monitor & T&H probe (Chamber version), panel mount configured for 0-100degC, 0-100%RH, 24V DC with data logging.
SDAPDHXXA  SDA Monitor & T&H probe (Chamber version), panel mount configured for 32-212degF, 0-100%RH, 24V DC.
SDAPDHXYA  SDA Monitor & T&H probe (Chamber version), panel mount configured for 32-212degF, 0-100%RH, 24V DC with data logging.
SDAPEGXXA  SDA Monitor & T&H probe (In-line version), panel mount configured for 0-100degC, 0-100%RH, 24V DC, Analox.
SDAPEGXYA  SDA Monitor & T&H probe (In-line version), panel mount configured for 0-100degC, 0-100%RH, 24V DC, Analox with data logging.
SDAPEHXXA  SDA Monitor & T&H probe (In-line version), panel mount configured for 32-212deF, 0-100%RH, 24V DC, Analox.
SDAPEHXYA  SDA Monitor & T&H probe (In-line version), panel mount configured for 32-212deF, 0-100%RH, 24V DC, Analox with data logging.
SDAPFJHXAXXX  SDA panel mount monitor and MEC VOC Sensor, Range 0 to 20ppm VOC in Helium
SDAPFJHYAXXX  SDA panel mount monitor and MEC VOC Sensor, Range 0 to 20ppm VOC in Helium, Fitted with data logging
SDAPFJNXA  SDA panel mount monitor and MEC VOC Sensor, Range 0 to 20ppm VOC in Nitrogen
SDAPFJNYA  SDA panel mount monitor and MEC VOC Sensor, Range 0 to 20ppm VOC in Nitrogen, Fitted with data logging
SDAPGKXXAXXX  0 - 100% He, panel mount.
SDAPGKXYAXXX  0 - 100% He, panel mount, datalogger.
SDAPHMXXAXXX  0 - 100 MSW, panel mount.
SDAPHMXYAXXX  0 - 100 MSW, panel mount, datalogger.
SDAPHNXXAXXX  0 - 400 MSW gauge, panel mount.
SDAPHNXYXXX  0 - 400 MSW gauge, panel mount, datalogger.
SDAPKTXXAYXP  Analox SDA Dual O2 Monitor. Displays both % O2 and mBar O2 and comes complete with an in-chamber MEC oxygen sensor. Range 0 to 3000mbar & 0 to 100% oxygen. Panel mount. Requires pressure reading from either an SDA Depth or an SDA ROC.
SDAPKTXYAYXP  Analox SDA Dual O2 Monitor. Displays both % O2 and mBar O2 and comes complete with an in-chamber MEC oxygen sensor. Range 0 to 3000mbar & 0 to 100% oxygen. Panel mount. Fitted with data logging. Requires pressure reading from either an SDA Depth or an SDA ROC.
SDAPLMXAYXX  SDA ROC 0.0 to 100.0 MSW, Rack Mount, with networking.
SDAPLMXYAXXX  SDA ROC 0.0 to 100.0 MSW, Panel Mount with data logging.
SDAPO2HESYSTEM  SDA Panel Mount oxygen & helium system, with data logging and networking enabled. Ranges: 0-100% oxygen, 0-100% helium.
SDAPPFNXAXXX  Analox SDA panel mount monitor and TEC carbon monoxide sensor, Range 0 to 20ppm carbon monoxide, Branded Analox.
SDAPPFNYAXXX  Analox SDA panel mount monitor and TEC carbon monoxide sensor, Range 0 to 20ppm carbon monoxide, Branded Analox. Fitted with data logging.
SDARAAXXAXXX  SDA O2 Rack mount, 0 to 100% O2, Analox (includes MEC O2 Sensor module).
SDARAAXYAXXX  SDA O2 Rack mount, 0 to 100% O2, Analox with data logging (includes MEC O2 Sensor module).
SDARAEXXAXXX  SDA O2 Rack mount, 0-3000mBar ppO2, Analox (includes MEC O2 Sensor module).
SDARAEXYAXXX  SDA O2 Rack mount, 0-3000mBar ppO2, Analox with data logging (includes MEC O2 Sensor module).
SDARBBNXA  SDA monitor & CO2 module, rack mount, 0 to 5000ppm.
SDARBBNYA  SDA monitor & CO2 module, rack mount, 0 to 5000ppm with data logging.
SDARBDNXA  SDA monitor & CO2 module, rack mount, 0 to 2%.
SDARBDNYA  SDA monitor & CO2 module, rack mount, 0 to 2% with data logging.
SDARCFNXA  SDA CO Air: rack mount, 0-20ppm CO in nitrogen.
SDARCFNYA  SDA CO Air: rack mount, 0-20ppm CO in nitrogen with data logging.
SDARCO2ASN  0-5000ppm SDA CO2 rack module atmospheric pressure compensated includes flow meter (calibrated on nitrogen).
SDARCO2BBN  0-2% SDA CO2 rack module atmospheric pressure compensated includes flow meter (calibrated on nitrogen).
SDARDGXXA  SDA Monitor & T&H probe (Chamber version) rack mount configured for 0-100degC, 0-100%RH, 24V DC.
SDARDGXYA  SDA Monitor & T&H probe (Chamber version) rack mount configured for 0-100degC, 0-100%RH, 24V DC with data logging.
SDARDHXXA  SDA Monitor & T&H probe (Chamber version), rack mount configured for 32-212degF, 0-100%RH, 24V DC.
SDARDHXYA  SDA Monitor & T&H probe (Chamber version), rack mount configured for 32-212degF, 0-100%RH, 24V DC with data logging.
SDAREGXXA  SDA Monitor & T&H probe (In-line version), rack mount configured for 0-100degC, 0-100%RH, 24V DC, Analox.
SDAREGXYA  SDA Monitor & T&H probe (In-line version), rack mount configured for 0-100degC, 0-100%RH, 24V DC, Analox with data logging.
SDAREHXXA  SDA Monitor & T&H probe (In-line version), rack mount configured for 32-212deF, 0-100%RH, 24V DC, Analox.
SDAREHXYA  SDA Monitor & T&H probe (In-line version), rack mount configured for 32-212deF, 0-100%RH, 24V DC, Analox with data logging.
SDARGKXXAXXX  0 - 100% He, rack mount.
SDARGKXYAXXX  0 - 100% He, rack mount, datalogger.
SDARHMXXAXXX  0 - 100 MSW, rack mount.
SDARHMXYAXXX  0 - 100 MSW, rack mount, datalogger.
SDARHNXXAXXX  0 - 400 MSW gauge, rack mount.
SDARHNXYAXXX  0 - 400 MSW gauge, rack mount, datalogger.
SDARKTXXAYXP  Analox SDA Dual O2 Monitor. Displays both % O2 and mBar O2 and comes complete with an in-chamber MEC oxygen sensor. Range 0 to 3000mbar & 0 to 100% oxygen. Rack mount. Requires pressure reading from either an SDA Depth or an SDA ROC.
SDARKTXYAYXP  Analox SDA Dual O2 Monitor. Displays both % O2 and mBar O2 and comes complete with an in-chamber MEC oxygen sensor. Range 0 to 3000mbar & 0 to 100% oxygen. Rack mount.Fitted with data logging. Requires pressure reading from either an SDA Depth or an SDA ROC.
SDARMRXYAXXX  SDA ROC 0.00 to 40.00 bar, Rack Mount with data logging.
SDARO2HESYSTEM  SDA Rack Mount oxygen & helium system, with data logging and networking enabled. Ranges: 0-100% oxygen, 0-100% helium.
SDARPFNXAXXX  Analox SDA rack mount monitor and TEC carbon monoxide sensor, Range 0 to 20ppm carbon monoxide, Branded Analox.
SDARPFNYAXXX  Analox SDA rack mount monitor and TEC carbon monoxide sensor, Range 0 to 20ppm carbon monoxide, Branded Analox. Fitted with data logging.
SSP1  Sensor Saver Pack 1 - quantity of 5
SSP2  Sensor Saver Pack 2 - quantity of 10
SUBCAL  Annual calibration of Sub MkIIP (1 off unit calibration. The price is per Sub MkIIP and includes; Replacement of O2 sensor, Replacement of D cells (batteries), Recalibration of O2, CO2, pressure and temperature sensors. Clean up and pressure test. Any additional work required would be advised and quoted.
SUBCAL(2OFF)  Annual calibration of Sub MkIIP (2 off unit calibration).
SUBMKIIPOHAUL  5 yearly refurbishment.
SUBRESETUP  Full resetup of Sub MkIIP to account for through life drift of CO2 sensor. This includes: Re-linearisation, Gas law and pressure testing, Temperature compensation.
TECCOBANP  CO Sensor: 0-20ppm CO in N2 (4 pin toxic), 200mm Lead, Plastic Enclosure
VQ546MR  Sensor head 0-100% Helium ATEX
XK0-445K  SDA combined panel mount adaptor plate kit.
XK0-472K  Universal mounting bracket for power supply, universal output module and sensor (CO, O2 or VOC sensors).
XK0-473K  For CO, O2 or VOC sensors - Mounting bracket.
XK0-662  24V DC UK plug panel mount power supply 40W, will power 2 SDA modules with accessories.
XK0-667  24V DC Universal plug panel mount power supply 40W, will power 2 SDA modules with accessories.