Glass Washers - Laboratory - Lancer

High Volume Washing 
The Lancer 1400 LX freestanding glassware washer dryer has a wide chamber and 3 levels with a choice of positions at the upper levels. This enables washing and drying high volumes of glassware – whether lots of similar items or mixed loads of various types and sizes. Suitable for either high throughput labs or centralized washing facilities serving many labs where often several 1400 LX models provide a continual bulk cleaning process.

Key features of 1400 LX: 
• Larger and wider chamber for greater capacity and volume with three levels of cleaning
• Powerful and rapid HEPA filtered drying through injectors and in wash chamber
• Increased safety with on-board storage and input of chemicals
• Higher grade 316 L Stainless Steel Chamber

All Lancer washers feature these key benefits:

• Fast cycles and outstanding results from powerful wash action and design
• Easy to use microprocessor controls with self-diagnostic software and alarms
• Flexibility of multi-level injection washing and interchangeable racks
• All sizes and types of glassware cleaned with chamber configuration choices
• Ergonomic and safe loading of racks on load bearing telescopic runners
• Choice of preset and user-customized (PIN code protected) programs
• Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps
• Robust high grade 304 L and 316L stainless steel construction (varies by model)
• IQ/OQ protocol and validation options available
• Cost effective – low life cycle costs and efficient operation uses less resources and inventory
• Eco-friendly low energy, chemicals and water usage 

Direct injection cleaning, HEPA filtered injector drying
The 1400 LX provides injection washing and drying on one to three levels simultaneously, delivering the wash/rinse solutions into narrow-necked glassware to provide for efficient and effective cleaning. 4 Washing positions are available and adjustable for the upper levels and provide for greater wash load flexibility. Low profile, rear manifold connections provide wash/rinse solution to the racks, maximizing usable rack surface, which is often reduced by common center manifold designs. 100% of the chamber volume is then available for an unbeaten washing capacity in this size/range of glassware washer dryer. HEPA filtered chamber and direct injection drying reduces cycle time by drying glassware and labware inside and out. This fast turnaround of glassware increases productivity by reducing the waiting time for glassware.

Ease of use
The 1400 LX features microprocessor controls with 4 pre-set programs for chemistry glassware, bacteriology/virology (high temperature), stubborn stains (agar) and volumetric glassware (lower-temp). For other applications the 1400 LX offers 36 additional programs that can be modified to fit any application. These custom programs offer the user the ability to easily adjust cycle parameters for program phases, temperatures, phase times and chemical dosing. The system control panel is user friendly with a 7 button keypad and 2 ½ inch LCD interface. Visual and audible alarms quickly alert the user in the event of a malfunction. Self-diagnostic software displays the error, often allowing the owner to avoid costly service calls. Self diagnostic software displays process and warning information in real time, allowing you to avoid costly service calls. Additionally with on-board storage capacity, the 1400 LX provides added safety.

Unbeaten cleaning and drying results
Lancer’s superior hydraulic design maximizes flow and pressure with a single, direct fluid path and no intermediate accessories. Additionally, racks are held in place by the door to ensure positive connection without the loss of pressure and flow that is common with other designs. Top and bottom spray arms provide thorough coverage for the interior and exterior of glassware. Water rinses are programmable for hot, cold and hot/cold DI water. These features allow for maximum use of the space within the chamber and ensure cleanliness. This design enhances full interchangeability of the racks between levels, providing further flexibility and reducing the number or racks needed.

Superior construction
The Lancer 1400 LX washer is built to the highest standards. With AISI 316 L stainless steel and electronically welded chamber (under Argon protection) and door, the unit is fully enclosed on all 6 sides with AISI 304 L stainless steel to protect components and wiring. Maximum durability of the washer components ensures a long life span. Additionally, the 1400 LX is insulated with synthetic rubber based, closed cell foam to guard against heat lost and reduce noise levels creating lower utility costs and a better user experience in the lab.

Inventory systems 
Having the right rack or accessory to fit your cleaning application is key to ensuring cleanliness and increasing productivity. With this in mind, Lancer provides versatile rack systems to accommodate all types of glassware and laboratory items. These rack systems include a wide range of accessories with various configurations of sizes and quantities of jets or baskets to handle all types of glass and lab ware from bottles to pipettes. Racks can be interchanged between levels to achieve further flexibility.

Technical Information

Product Features

304L stainless steel construction

Electrical supply 400V 3 phase (230V single phase optional)

Water inlets for hot, cold and purified

Microprocessor memory holds up to 40 adjustable programs

Technical Specifications

1780 x 880 x 860

855 x 655 x 660

1 to 4

35 l.

750 l/mn

1750 x 1500 x 754

855 x 655 x 660

1 to 4

35 l.

750 l/mn

2000 x 880 x 1200

855 x 655 x 660

1 to 4

35 l.

750 l/mn

304L stainless steel construction

Electrical supply 400V 3 phase (230V single phase optional)

Water inlets for hot, cold and purified

Microprocessor memory holds up to 40 adjustable programs

1490 x 790 x 690

640 x 582 x 500

1 to 3

18 l.

600 l/mn

1490 x 1050 x 620

640 x 582 x 500

1 to 3

18 l.

600 l/mn

1760 x 780 x 1150

640 x 582 x 500

1 to 3

18 l.

600 l/mn

UPDPSS - Double door super drying models Materials & ratings as UPSS above

Lancer Glass Washer 1300UP

Glass Washers - Laboratory - Lancer

Small footprint: large capacity 

A great all around Glassware Washer Dryer, the Lancer 910 LX offers 2 levels of cleaning with a choice of position for the upper level. This freestanding glassware washer while being contained in a small footprint, does not compromise on wash capacity. It includes a built-in drawer for the safe storage and input of chemicals. It also offers powerful forced air drying through the injectors and in the chamber to ensure complete and rapid drying of glassware both inside and out. Additionally the 910 LX offers ergnomic door level loading. Rack systems are common across the 810-1300 LX and 1800 LXA models enabling economical upgrade when expanding the capacity of your lab.


Key features of 910 LX: 
• Small footprint with surprisingly large capacity
• Powerful and rapid HEPA filtered drying through injectors and in wash chamber
• Increased safety with on-board storage and input of chemicals
• Ergonomic door level height allows convenient loading and helps to avoid back strain
• Higher grade 316 L Stainless Steel Chamber
 

All Lancer washers feature these key benefits:

• Fast cycles and outstanding results from powerful wash action and design
• Easy to use microprocessor controls with self-diagnostic software and alarms
• Flexibility of multi-level injection washing and interchangeable racks
• All sizes and types of glassware cleaned with chamber configuration choices
• Ergonomic and safe loading of racks on load bearing telescopic runners
• Choice of preset and user-customized (PIN code protected) programs
• Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps
• Robust high grade 304 L and 316L stainless steel construction (varies by model)
• IQ/OQ protocol and validation options available
• Cost effective – low life cycle costs and efficient operation uses less resources and inventory
• Eco-friendly low energy, chemicals and water usage 
 

Direct injection cleaning, HEPA filtered injector drying
The 910 LX provides injection washing and drying on one or two levels simultaneously, delivering the wash/rinse solutions into narrow-necked glassware to provide for efficient and effective cleaning. 3 Washing positions are available and adjustable for the upper level and provide for greater wash load flexibility. Low profile, rear manifold connections provide wash/rinse solution to the racks, maximizing usable rack surface,which is often reduced by common center manifold designs. 100% of the chamber volume is then available for an unbeaten washing capacity in this size/range of glassware washer dryer. HEPA filtered chamber and direct injection drying reduces cycle time by drying glassware and labware inside and out. This fast turnaround of glassware increases productivity by reducing the waiting time for glassware.

Ease of use
The 910 LX features microprocessor controls with 4 pre-set programs for chemistry glassware, bacteriology/virology (high temperature), stubborn stains (agar) and volumetric glassware (lower-temp). For other applications the 910 LX offers 38 additional programs that can be modified to fit any application. These custom programs offer the user the ability to easily adjust cycle parameters for program phases, temperatures, phase times and chemical dosing. The system control panel is user friendly with a 7 button keypad and 2 ½ inch LCD interface. Visual and audible alarms quickly alert the user in the event of a malfunction. Self-diagnostic software displays the error, often allowing the owner to avoid costly service calls. Self diagnostic software displays process and warning information in real time, allowing you to avoid costly service calls. The 910 LX offers ergonomic loading height to reduce back strain. Additionally with on-board storage capacity, the 910 LX provides added safety.

Unbeaten cleaning and drying results
Lancer’s superior hydraulic design maximizes flow and pressure with a single, direct fluid path and no intermediate accessories. Additionally, racks are held in place by the door to ensure positive connection without the loss of pressure and flow that is common with other designs. Top and bottom spray arms provide thorough coverage for the interior and exterior of glassware. Water rinses are programmable for hot, cold and hot/cold DI water. These features allow for maximum use of the space within the chamber and ensure cleanliness. This design enhances full interchangeability of the racks between levels, providing further flexibility and reducing the number or racks needed.

Superior construction
The Lancer 910 LX washer is built to the highest standards. With AISI 316 L stainless steel and electronically welded chamber (under Argon protection) and door, the unit is fully enclosed on all 6 sides with AISI 304 L stainless steel to protect components and wiring. Maximum durability of the washer components ensures a long life span. Additionally, the 910 LX is insulated with synthetic rubber based, closed cell foam to guard against heat lost and reduce noise levels creating lower utility costs and a better user experience in the lab.

Inventory systems 
Having the right rack or accessory to fit your cleaning application is key to ensuring cleanliness and increasing productivity. With this in mind, Lancer provides versatile rack systems to accommodate all types of glassware and laboratory items. These rack systems include a wide range of accessories with various configurations of sizes and quantities of jets or baskets to handle all types of glass and lab ware from bottles to pipettes. Racks can be interchanged between levels to achieve further flexibility.

Technical Information

Glass Washers - Laboratory - Lancer

Underbench Washer with chemical storage and direct injection drying 
The Lancer 820 LX underbench glassware washer dryer has the same chamber size as the 810/815 but is 300 mm (12”) wider externally as it has a built-in drawer for the safe storage and input of chemicals. More importantly it has powerful forced hot air drying through the injectors and in the chamber to ensure complete and rapid drying of glassware both inside and out… ready to use immediately! Rack systems are common across the 810-1300 LX and 1800 LXA models enabling economical upgrade when expanding the capacity of your lab.

Key features of 820 LX: 
• Powerful and rapid drying through injectors as well as in chamber
• Fast turnaround avoids waiting for glassware
• Increased safety with on-board storage and input of chemicals
• Economical and accurate dosing by two peristaltic pumps
 

All Lancer washers feature these key benefits:

• Fast cycles and outstanding results from powerful wash action and design
• Easy to use microprocessor controls with self-diagnostic software and alarms
• Flexibility of multi-level injection washing and interchangeable racks
• All sizes and types of glassware cleaned with chamber configuration choices
• Ergonomic and safe loading of racks on load bearing telescopic runners
• Choice of preset and user-customized (PIN code protected) programs
• Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps
• Robust high grade 304 L and 316L stainless steel construction (varies by model)
• IQ/OQ protocol and validation options available
• Cost effective – low life cycle costs and efficient operation uses less resources and inventory
• Eco-friendly low energy, chemicals and water usage 

Direct injection cleaning, HEPA filtered injector drying
The 820 LX provides injection washing and drying on one or two levels simultaneously, delivering the wash/rinse solutions into narrow-necked glassware to provide for efficient and effective cleaning. Low profile, rear manifold connections provide wash/rinse solution to the racks, maximizing usable rack surface, which is often reduced by common center manifold designs. 100% of the chamber volume is then available for an unbeaten washing capacity in this size/range of glassware washer dryer. HEPA filtered chamber and direct injection drying reduces cycle time by drying glassware and labware inside and out. This fast turnaround of glassware increases productivity by reducing the waiting time for glassware.

Ease of use
The 820 LX features microprocessor controls with 4 pre-set programs for chemistry glassware, bacteriology/virology (high temperature), stubborn stains (agar) and volumetric glassware (lower-temp). For other applications the 820 LX offers 38 additional programs that can be modified to fit any application. These custom programs offer the user the ability to easily adjust cycle parameters for program phases, temperatures, phase times and chemical dosing. The system control panel is user friendly with a 7 button keypad and 2 ½ inch LCD interface. Visual and audible alarms quickly alert the user in the event of a malfunction. Self-diagnostic software displays the error, often allowing the owner to avoid costly service calls. Self diagnostic software displays process and warning information in real time, allowing you to avoid costly service calls. Additionally with on-board storage capacity, the 820 LX provides added safety.

Unbeaten cleaning and drying results
Lancer’s superior hydraulic design maximizes flow and pressure with a single, direct fluid path and no intermediate accessories. Additionally, racks are held in place by the door to ensure positive connection without the loss of pressure and flow that is common with other designs. Top and bottom spray arms provide thorough coverage for the interior and exterior of glassware. Water rinses are programmable for hot, cold and hot/cold DI water. These features allow for maximum use of the space within the chamber and ensure cleanliness. This design enhances full interchangeability of the racks between levels, providing further flexibility and reducing the number or racks needed.

Superior construction
The Lancer 820 LX washer is built to the highest standards. With AISI 304 L stainless steel and electronically welded chamber (under Argon protection), the unit is fully enclosed on all 6 sides to protect components and wiring. Maximum durability of the washer components ensures a long life span. Additionally, the 820 LX is insulated with synthetic rubber based, closed cell foam to guard against heat lost and reduce noise levels creating lower utility costs and a better user experience in the lab.

Inventory systems 
Having the right rack or accessory to fit your cleaning application is key to ensuring cleanliness and increasing productivity. With this in mind, Lancer provides versatile rack systems to accommodate all types of glassware and laboratory items. These rack systems include a wide range of accessories with various configurations of sizes and quantities of jets or baskets to handle all types of glass and lab ware from bottles to pipettes. Racks can be interchanged between levels to achieve further flexibility.

Technical Information

Glass Washers - Laboratory - Lancer

The Ultimate Space Saving Washer with Drying 

No need to compromise on quality of results if your laboratory has limited space or budget. The Lancer 815 LX underbench glassware washer fits neatly in the standard 24”/60cm laboratory casework, offers professional features and the same high performance cleaning principles of all Lancer washers. Hot forced air chamber drying provides a faster turnaround in your cleaning process. Rack systems are common across the 810-1300 LX and 1800 LXA models enabling economical upgrade when expanding the capacity of your lab.

Key features of 815 LX: 
• Hot, forced air chamber drying
• Efficient direct injection cleaning 
• Flexibility with two independent wash levels and interchangeable racks
• Economical and accurate dosing by two peristaltic pumps
• High grade stainless steel clad on all sides for stand alone applications

All Lancer washers feature these key benefits:

• Fast cycles and outstanding results from powerful wash action and design
• Easy to use microprocessor controls with self-diagnostic software and alarms
• Flexibility of multi-level injection washing and interchangeable racks
• All sizes and types of glassware cleaned with chamber configuration choices
• Ergonomic and safe loading of racks on load bearing telescopic runners
• Choice of preset and user-customized (PIN code protected) programs
• Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps
• Robust high grade 304 L and 316L stainless steel construction (varies by model)
• IQ/OQ protocol and validation options available
• Cost effective – low life cycle costs and efficient operation uses less resources and inventory
• Eco-friendly low energy, chemicals and water usage 

Direct injection cleaning with chamber drying
The 815 LX provides injection washing and chamber drying on one or two levels simultaneously, delivering the wash/rinse solutions into narrow-necked glassware to provide for efficient and effective cleaning. Low profile, rear manifold connections provide wash/rinse solution to the racks, maximizing usable rack surface, which is often reduced by common center manifold designs. 100% of the chamber volume is then available for an unbeaten washing capacity in this size/range of glassware washer dryer. Hot, forced air drying via a heating element and blower provides drying in the wash chamber, reducing cycle time by drying glassware and labware.

Ease of use
The 815 LX features microprocessor controls with 4 pre-set programs for chemistry glassware, bacteriology/virology (high temperature), stubborn stains (agar) and volumetric glassware (lower-temp). For other applications the 815 LX offers 16 additional programs that can be modified to fit any application. These custom programs offer the user the ability to easily adjust cycle parameters for program phases, temperatures, phase times and chemical dosing. The system control panel is user friendly with a 7 button keypad and 2 ½ inch LCD interface. Visual and audible alarms quickly alert the user in the event of a malfunction. Self-diagnostic software displays the error, often allowing the owner to avoid costly service calls. Self diagnostic software displays process and warning information in real time, allowing you to avoid costly service calls.

Unbeaten cleaning and drying results
Lancer’s superior hydraulic design maximizes flow and pressure with a single, direct fluid path and no intermediate accessories. Additionally, racks are held in place by the door to ensure positive connection without the loss of pressure and flow that is common with other designs. Top and bottom spray arms provide thorough coverage for the interior and exterior of glassware. Water rinses are programmable for hot, cold and hot/cold DI water. These features allow for maximum use of the space within the chamber and ensure cleanliness. This design enhances full interchangeability of the racks between levels, providing further flexibility and reducing the number or racks needed.

Superior construction
The Lancer 815 LX washer is built to the highest standards. With AISI 304 L stainless steel and electronically welded chamber (under Argon protection), the unit is fully enclosed on all 6 sides to protect components and wiring. Maximum durability of the washer components ensures a long life span. Additionally, the 815 LX is insulated with synthetic rubber based, closed cell foam to guard against heat lost and reduce noise levels creating lower utility costs and a better user experience in the lab.

Inventory systems 
Having the right rack or accessory to fit your cleaning application is key to ensuring cleanliness and increasing productivity. With this in mind, Lancer provides versatile rack systems to accommodate all types of glassware and laboratory items. These rack systems include a wide range of accessories with various configurations of sizes and quantities of jets or baskets to handle all types of glass and lab ware from bottles to pipettes. Racks can be interchanged between levels to achieve further flexibility.

Technical Information

Glass Washers - Laboratory - Lancer

The Ultimate Space Saving Washer 
In today’s laboratory, space and money are often in short supply. With this in mind, Lancer has engineered the 810 LX underbench glassware washer to be a perfect fit for any lab and any budget. While fitting neatly in standard 24”/60cm laboratory casework, the entry level underbench 810 LX lab washer offers professional features and the same high performance cleaning principles of all Lancer washers. Rack systems are common across the 810-1300 LX and 1800 LXA models enabling economical upgrade when expanding the capacity of your lab.

Key features of 810 LX: 
• Efficient direct injection cleaning
• Ideal for minimum space or budget
• Flexibility with two independent wash levels and interchangeable racks
• Economical and accurate dosing by two peristaltic pumps
• High grade stainless steel clad on all sides for stand alone applications

All Lancer washers feature these key benefits:

• Fast cycles and outstanding results from powerful wash action and design
• Easy to use microprocessor controls with self-diagnostic software and alarms
• Flexibility of multi-level injection washing and interchangeable racks
• All sizes and types of glassware cleaned with chamber configuration choices
• Ergonomic and safe loading of racks on load bearing telescopic runners
• Choice of preset and user-customized (PIN code protected) programs
• Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps
• Robust high grade 304 L and 316L stainless steel construction (varies by model)
• IQ/OQ protocol and validation options available
• Cost effective – low life cycle costs and efficient operation uses less resources and inventory
• Eco-friendly low energy, chemicals and water usage

Direct injection cleaning
The 810 LX provides injection washing on one or two levels simultaneously, delivering the wash/rinse solutions into narrow-necked glassware to provide for efficient and effective cleaning. Low profile, rear manifold connections provide wash/rinse solution to the racks, maximizing usable rack surface, which is often reduced by common center manifold designs. 100% of the chamber volume is then available for an unbeaten washing capacity in this size/range of glassware washers.

Ease of use
The 810 LX features microprocessor controls with 4 pre-set programs for chemistry glassware, bacteriology/virology (high temperature), stubborn stains (agar) and volumetric glassware (lower-temp). For other applications the 810 LX offers 16 additional programs that can be modified to fit any application. These custom programs offer the user the ability to easily adjust cycle parameters for program phases, temperatures, phase times and chemical dosing. The system control panel is user friendly with a 7 button keypad and 2 ½ inch LCD interface. Visual and audible alarms quickly alert the user in the event of a malfunction. Self-diagnostic software displays the error, often allowing the owner to avoid costly service calls. Self diagnostic software displays process and warning information in real time, allowing you to avoid costly service calls.

Unbeaten cleaning results
Lancer’s superior hydraulic design maximizes flow and pressure with a single, direct fluid path and no intermediate accessories. Additionally, racks are held in place by the door to ensure positive connection without the loss of pressure and flow that is common with other designs. Top and bottom spray arms provide thorough coverage for the interior and exterior of glassware. Water rinses are programmable for hot, cold and hot/cold DI water. These features allow for maximum use of the space within the chamber and ensure cleanliness. This design enhances full interchangeability of the racks between levels, providing further flexibility and reducing the number or racks needed.

Superior construction
The Lancer 810 LX washer is built to the highest standards. With AISI 304 L stainless steel and electronically welded chamber (under Argon protection), the unit is fully enclosed on all 6 sides to protect components and wiring. Maximum durability of the washer components ensures a long life span. Additionally, the 810 LX is insulated with synthetic rubber based, closed cell foam to guard against heat lost and reduce noise levels creating lower utility costs and a better user experience in the lab.

Inventory systems 
Having the right rack or accessory to fit your cleaning application is key to ensuring cleanliness and increasing productivity. With this in mind, Lancer provides versatile rack systems to accommodate all types of glassware and laboratory items. These rack systems include a wide range of accessories with various configurations of sizes and quantities of jets or baskets to handle all types of glass and lab ware from bottles to pipettes. Racks can be interchanged between levels to achieve further flexibility.

Technical Information