Water Purification - Merck Millipore

Ultrapure Water from Pretreated Water for Low-Volume Critical Applications

The Synergy system is designed for laboratories that already have access to purified water and need a point-of-use system to supply high quality ultrapure water. The compact design assures easy installation anywhere in your lab, on the bench or wall-mounted. The Synergy system allows delivery of a fixed volume of Type 1 water and automatically shuts off once the selected volume has been delivered.

For applications requiring very low organic contaminants levels, the Synergy system also incorporates a dual wavelength UV lamp to produce water with <5 ppb TOC (when feedwater TOC is below 50 ppb), making it suitable for HPLC, GC, ILC and TOC analyses. With the BioPak cartridge as a final filter, Synergy systems produce pyrogen-free, Nuclease-free water.


The Synergy system is designed for simple and intuitive operation. Water quality parameters (resistivity or conductivity, temperature) are clearly indicated on a bright color display. Maintenance is limited to a quick and easy replacement of a single consumable.

Applications

• LC buffer preparation
• HPLC isocratic and gradient solution preparation
• Sample dilution
• Buffer, reagents for molecular biology and cell culture media preparation
• Preparation of chemical solutions used with titrators, spectrophotometers and electrophoresis systems

Features

• Produces Type 1 water (18.2 MO·cm at 25 °C ultrapure water) on demand from pretreated water (reverse osmosis or demineralized water).
• Maintenance reduced to a single cartridge change once or twice a year, depending on the volume produced and the quality of the pure water feed.
• System designed for users needing between 2 and 100 liters of ultrapure water per day with instant flow rate of 1.2 L/min.
• Quality suitable for HPLC and other spectrophotometric/spectroscopic analytical techniques for biological, biochemical, and cell culture applications 
• Dispensing adapted to different size laboratory glassware
• Time-saving fixed-volume dispense.

Technical Information

Water Purification - Merck Millipore

Ultrapure Water Quality on Demand

The Super-Q Plus System is a high-flow water system designed to provide the "final polish" to water which has been pretreated by reverse osmosis, distillation or deionization. Super-Q Plus systems consistently produce ultrapure water quality which exceeds Type 1 ASTM/CAP/CLSI specifications.

The Super-Q Plus water system features a modular design for the production of ultrapure water. The system also features automatic recirculation of water on an hourly basis to maintain water quality between uses. Because Super-Q product water is produced "on demand", there's no need to store water and risk degrading water quality over time.

Applications

• Tissue culture media preparation
• Reagent preparation
• Microelectronics wafer rinsing
 

Cartridge Selection Guide

Technical Information

Water Purification - Merck Millipore

Type 1 Reagent Grade Water, Flow Rate Above 0.5 L/min

The Simplicity portable water purification system can be located anywhere in your laboratory. It requires no special installation, no water feed connection and produces ultrapure water on demand from pretreated water (Elix system, distilled, deionized or reverse osmosis water).

For scientists who use less than 5 liters of ultrapure water per day, the Simplicity system is an economical alternative for laboratories that currently use bottled water. Simplicity ultrapure water, produced and used at the point-of-use, is not subject to the degradation and contamination that affects bottled water. The intuitive color graphic display of the Simplicity system means that you can instantly see all system parameters, whether you want to know the water quality, reservoir level or when to replace the pack. With its integrated, removable reservoir, the Simplicity system is designed to make your work easier. The Simplicity UV system contains a built-in dual-wavelength UV lamp (185 and 254 nm) to reduce organic contaminants to < 5 ppb in your ultrapure water, making it suitable for your sensitive applications, such as HPLC, GC and TOC analysis.

Applications

• Production of mobile phase for chromatographic separations
• Preparation of blanks and standard solutions for spectrophotometry, spectroscopy or other analytical techniques 
• Preparation of buffers for biochemical experiments

Features

• Produces Type 1 water (18.2 MO·cm at 25 °C ultrapure water) on demand from pretreated water (reverse osmosis or deionized water)*.
• Installation requires no plumbing.
• System draws water from a removable, refillable, built-in reservoir.
• Flow rate > 0.5 L/min.
• Maintenance reduced to a single cartridge change once or twice a year, based on the resistivity value displayed for the ultrapure water produced.
• System designed for users needing between 1 and 5 liters of ultrapure water per day with instant flow rate of 0.5 L/min.
• System comes with or without a UV lamp (depending on incidence of TOC on applications).
• Alarm function in the event of a sudden drop in the quality of the product water guarantees your water quality at all times.
• Dispensing adapted to different size laboratory glassware.

Compliance with Regulatory Standards

Systems are UL and cUL listed under file E216983 in the “Laboratory Use Electrical Equipment Category”, and meet the requirements of UL 61010 standards. Systems conform to European Union CE directives 89/336/CEE (electromagnetic compatibility) and 73/23/CEE (electrical equipment within certain voltage limits). All systems are manufactured in ISO 9001 and ISO 14001 certified environments.

Technical Information

Water Purification - Merck Millipore

Compact System Integrates Several Purification Technologies
The RiOs-DI 3 UV system is a very compact solution that efficiently combines reverse osmosis technology with deionization resins to produce high quality pure water of high resistivity and low TOC (> 10 MO·cm and < 50 ppb. The system’s product water is stored in an internal reservoir and is ideal for low volume routine laboratory applications.

The unique simple “plug-and-use” purification pack enables the production of high quality (Type 2) water from tap water. To ensure reliable contaminant removal, the pump-assisted flow of tap water steadily reaches the cartridge, in spite of low pressure on the supply side or drop in water temperature.

Applications

• Buffer and reagent preparation
• Microbiological culture media preparation 
• General washing
• Feed to Milli-Q and Synergy ultrapure water systems
 

Features

• Combining several purification technologies including Reverse Osmosis and Deionization, the RiOs-DI 3 UV system removes all types of water contaminants (typically >99 %).
• The built in UV lamp* is ideal for applications that require low bacteria levels.
• The consumable is a “unique all-in-one” pack that includes the pre-treatment, reverse osmosis membrane and ion-exchange resin.
• Maintenance is reduced to the quick change of a single cartridge.
• Backlit color display shows resistivity, temperature and water level in reservoir.
• Integrated, compact 6-liter reservoir.

* This system is also available without UV lamp

Technical Information

Water Purification - Merck Millipore

Produce Up to 8000 L/day of Type 3 Laboratory-grade Water

RiOs reverse osmosis systems are designed to produce up to 8000 L/day of Type 3 laboratory-grade water from potable tap feedwater.

One Complete Purification and Control Unit
RiOs systems can be integrated into a centralized system, providing total control of all parameters within the system itself as well as within the external pure water distribution loop.

Applications

RiOs product water is suitable for the following applications:

• Glassware rinsing Feedwater for humidifiers, autoclaves and washing machines Feedwater for Milli-Q and Super-Q ultrapure water systems

Features

• Total control of all functions, operating parameters and standard accessory components within the RiOs system itself and within the external pure water distribution loop
• Advanced reverse osmosis allows for high water recovery
• Constant product flow rate independent of temperature from 7–30 °C
• Built-in UV lamp for bacteria-sensitive applications
• Easy-to-replace pretreatment packs, tailored to the feedwater source
• Built-in conductivity monitoring to ensure water quality

Technical Information

Water Purification - Merck Millipore

Produce Up To 16 L/h of Type 3 Laboratory-grade Water From Tap

RiOs systems produce Type 3, laboratory-grade pure water at a constant flow rate. Systems are fed directly with potable tap water and combine complementary purification technologies in a compact system design that is easy to operate, reliable, and allows total control over the water produced at a low operating cost.

Applications

• Glassware rinsing
• Feedwater for humidifiers, autoclaves, washing machines
• Feedwater for Milli-Q ultrapure water systems

Features

• Easy-to-install (plug and use concept) prefiltration pack unit includes three types of purification media
• Self-maintenance of the reverse osmosis membrane
• Advanced reverse osmosis technology with high recovery loop reduces water consumption by more than 50%
• Constant product flow rate
• Optional UV lamp for optimum water quality for applications sensitive to bacteria
• All system functions are accessible from a user-friendly keypad and displayed on backlit screen

Technical Information

Water Purification - Merck Millipore

Economical Pure Water Solution for Your Type 3 Water Needs

Suitable for general, non-critical laboratory applications or as a pretreatment for ultrapure water systems, the RiOs 3 system provides an ideal solution for your Type 3 laboratory-grade water needs.

Applications

• Manual cleaning and glassware rinsing
• Buffer preparation

Feedwater for:

— Humidifiers
— Autoclaves
— Glassware washers
— Ultrapure water systems
— (Synergy or Milli-Q systems)

Features

Efficient removal > 94 % of ionic contaminants. Efficient removal > 99 % of other contaminants (organics, bacteria, particles). The consumable is a “unique all-in-one” pack that includes the pretreatment and the reverse osmosis membrane. Maintenance reduced to the change of a single cartridge once or twice a year. Backlit color display shows conductivity, temperature and water level in reservoir. Integrated, compact 6-liter reservoir – connection to a 30 or 60 L reservoir is possible for higher daily needs.

Technical Information

Water Purification - Merck Millipore

This new system delivers ultrapure (Type 1) water customized to fit a broad range of research areas and makes ultrapure water conveniently available in any laboratory, regardless of space limitations or the stringency of regulatory norms.

Convenient Water Delivery

• Save time with the volumetric function, automatically delivering the water volume that you need, designed to fit the height & shape of all laboratory glassware.
• Easily prepare solutions with the low flow function to precisely adjust the meniscus in volumetric flasks.

Optimized Purification

Water is purified in a first step to reach a resistivity of 18.2 MO·cm at 25 °C and a TOC value below 5 ppb. This water is sent through a small recirculation loop to the POD pak, where a final purification step removes contaminants critical for specific experiments, just before water leaves the system. Choose from a variety of available polishing cartridges to remove specific contaminants at the point of delivery.

Easy Access to Information

A graphic screen clearly displays water quality and system status information in the language of your choice (6 different languages). A Quick Reference Guide located in the door of the Milli-Q Reference water system provides additional support for retrieving information. 

Easy and Reduced Maintenance

With easily replaceable cartridges, a long-lasting UV lamp and timely service alerts, the system runs smoothly with nominal downtime. As with any Millipore water purification system, a comprehensive range of service programs are available to install, maintain, validate, and calibrate the Milli-Q Reference system. 

Accessories to Customize Your System

• Save additional bench space by placing the Milli-Q Reference system under your bench or by using the wall mounting bracket
• Connect the Milli-Q Reference system to a Q-POD, and ultrapure water is always within reach. Daily performance is facilitated by having both ultrapure water and information conveniently delivered at the point of use.
• Protect your system with a water sensor, feed water conductivity meter, or a level sensor if the system is fed from a reservoir.

Technical Information

Water Purification - Merck Millipore

Optimum pure water production

Tap water is first purified to pure (Type 3) water by reverse osmosis (RO) using techniques designed and optimized by Millipore:


• Pre-treatment ProGard® cartridge validated to extend the lifetime of the RO cartridge
• Reject recirculation loop which recycles reject water treated by the Progard to minimize tap water usage and extend Progard lifetime while avoiding fouling or scaling issues that might shorten the RO cartridge lifetime.
• Unique system adaptation to feed water temperature in order to avoid flow rate decrease during the winter time when tap water is colder.
• Unique safety device ensuring that only low ionic permeate water will be sent to the tank in order to warrant adequate pure water quality and to increase the life time of the ion-exchange cartridge used to produce ultrapure water.
• Complete process monitoring system checking systematically water temperature, pressure, conductivity and RO rejection using calibrated meters at different steps.

The pure water produced by the Reverse Osmosis is stored in a tank designed to minimize risks of contamination during water storage. Millipore tanks level sensor will allow the systems to automatically start or stop producing water when you want it, display accurately on the systems screen the water level in the tank and have safety devices preventing overflow or system running dry.

From that reservoir, water can be sourced though a front valve or sent by a delivery pump to feed instruments such as a glassware washing machine, or further processed by the Milli-Q Direct to produce ultrapure (type1) water.

Convenience in ultrapure water delivery
From pure water, the Milli-Q Direct produces ultrapure water adapted to your specific applications and exceeding the requirements of the most demanding norms.

We’ve achieved all this with a new purification strategy. Water is purified in a first step using unique Jetpore ion-exchange resin, synthetic activated carbon and UV lamp emitting at 185 and 254 nm to reach a resistivity of 18.2 MO.cm at 25 °C and a TOC value below 5 ppb, both monitored by advanced analytical techniques.

This water is sent through a small recirculation loop to the POD Pak, where a final purification step, critical for specific experiments, removes contaminants just before water leaves the system.

Technical Information

Water Purification - Merck Millipore

The Milli-Q Advantage system has been designed to deliver high quality ultrapure water adapted to every user’s needs in today’s laboratory environment.

The system features two separate and distinct components: the production unit and the delivery point-of-use unit:


• The Milli-Q production unit is a compact system that can be placed either on the bench, under the bench or on a wall–wherever it best suits you.
• The Q-POD (Quality-Point-of-Delivery) unit provides final polishing at the point-of-use, delivering ultrapure water adapted to specific needs. The Q-POD’s interface simplifies operation and displays essential data for complete user reassurance. Up to three Q-PODs can be used with each production unit at different locations within the same laboratory.

Convenient Delivery

Daily performance is facilitated by having both ultrapure water and information conveniently delivered at the point-of-use.


• The Q-POD unit is always within reach, and its convenient and adaptable dispensing enables the user to work both intuitively and precisely. The user can select either a very precise volume with the autofill key or manually press the plunger.
• The Q-POD unit’s multicolor graphic display allows easy interaction with the system and provides information about water quantity and quality.

Optimized Purification

The most reliable ultrapure water quality depends on building an optimized purification sequence.


• Pure water, ideally from an Elix purification system, enters the Q-Gard pretreatment pack which is chosen based on the feedwater source.
• Pretreated water then passes into a double wavelength UV lamp, which ensures organic molecule oxidation and bacteria destruction.
• Next, the Quantum polishing cartridge removes ionic and organic contaminants below trace levels to match the water quality required for the lab application.
• Finally, the ultrapure water produced by the system recirculates through a loop up to the Q-POD unit, where a unique range of final purifiers ensure the final purification step for all applications.

Both the Q-Gard and Quantum cartridges incorporate Millipore’s eSure technology, which enables full traceability.
 

Total Control

Q-POD screen

Double monitoring allows control over both ionic and organic contaminants that can impact research results. Calibrated meters are used to measure the quality of produced water.


• Accurate Total Organic Carbon (TOC) monitor High-sensitivity resistivity cell

Water production unit screen

Routine maintenance and troubleshooting procedures can be managed from the primary graphic screen on the Milli-Q Advantage production unit.
 

Complete Peace of Mind

System Certificates

To assist laboratories in following industry requirements, Milli-Q Advantage systems are delivered with specific Certificates of Quality and Calibration for temperature, resistivity and TOC meters.

Advanced Technical Support

In addition, a complete range of services, including validation support, is provided by trained Millipore Field Service Support Engineers using calibrated equipment and Qualification Workbooks.

Technical Information

Water Purification - Merck Millipore

The Milli-Q Advantage system has been designed to deliver high quality ultrapure water adapted to every user’s needs in today’s laboratory environment.

The system features two separate and distinct components: the production unit and the delivery point-of-use unit:


• The Milli-Q production unit is a compact system that can be placed either on the bench, under the bench or on a wall–wherever it best suits you.
• The Q-POD (Quality-Point-of-Delivery) unit provides final polishing at the point-of-use, delivering ultrapure water adapted to specific needs. The Q-POD’s interface simplifies operation and displays essential data for complete user reassurance. Up to three Q-PODs can be used with each production unit at different locations within the same laboratory.

Convenient Delivery

Daily performance is facilitated by having both ultrapure water and information conveniently delivered at the point-of-use.


• The Q-POD unit is always within reach, and its convenient and adaptable dispensing enables the user to work both intuitively and precisely. The user can select either a very precise volume with the autofill key or manually press the plunger.
• The Q-POD unit’s multicolor graphic display allows easy interaction with the system and provides information about water quantity and quality.

Optimized Purification

The most reliable ultrapure water quality depends on building an optimized purification sequence.


• Pure water, ideally from an Elix purification system, enters the Q-Gard pretreatment pack which is chosen based on the feedwater source.
• Pretreated water then passes into a double wavelength UV lamp, which ensures organic molecule oxidation and bacteria destruction.
• Next, the Quantum polishing cartridge removes ionic and organic contaminants below trace levels to match the water quality required for the lab application.
• Finally, the ultrapure water produced by the system recirculates through a loop up to the Q-POD unit, where a unique range of final purifiers ensure the final purification step for all applications.

Both the Q-Gard and Quantum cartridges incorporate Millipore’s eSure technology, which enables full traceability.
 

Total Control

Q-POD screen

Double monitoring allows control over both ionic and organic contaminants that can impact research results. Calibrated meters are used to measure the quality of produced water.


• Accurate Total Organic Carbon (TOC) monitor High-sensitivity resistivity cell

Water production unit screen

Routine maintenance and troubleshooting procedures can be managed from the primary graphic screen on the Milli-Q Advantage production unit.
 

Complete Peace of Mind

System Certificates

To assist laboratories in following industry requirements, Milli-Q Advantage systems are delivered with specific Certificates of Quality and Calibration for temperature, resistivity and TOC meters.

Advanced Technical Support

In addition, a complete range of services, including validation support, is provided by trained Millipore Field Service Support Engineers using calibrated equipment and Qualification Workbooks.

Technical Information

Water Purification - Merck Millipore

The right water quality for all lab activities. The Milli-Q Integral system includes a comprehensive and optimized sequence of water purification and monitoring technologies in a single unit, allowing both pure and ultrapure water to be produced directly from tap.

It provides pressurized, bacteria-free water through E-POD (Elix-Point-of-Delivery) units and Milli-Q ultrapure water through Q-POD (Quality-Point-of-Delivery) units.

Water can be delivered from the system’s exclusive production unit to as many as 3 independent PODs that can be conveniently located at different places in the laboratory. Each POD incorporates a color backlit screen enabling the user to check the operation of the entire system and the water quality at a glance.

The ergonomic design of the PODs accounts for the height and shape of regular laboratory glassware to ensure optimum user convenience.

Water can be delivered at different flow rates from the mobile dispenser located at the end of an 80 cm recirculation loop. The user can also select a specific water volume and have the Q-POD/E-POD unit automatically fill any laboratory vessel from a 100 mL Erlenmeyer flask to a 5 L calibrated flask or 20 L carboy.

To ensure easy adaptation to various laboratory applications, validated POD Packs polishers are available to remove contaminants that can impact specific applications (such as pyrogens, nucleases, bacteria, particulates, organics, etc.) just before water leaves the system. Configurations can easily evolve to match lab activity changes or extensions.

Features

• Pure and ultrapure water is available directly from tap water (no need to have a DI source in the lab) from 60 L/day up to 350 L/day (depending on model)
• Consistent production of superior quality pure water (better than twice the quality of distilled water) without the need to regenerate a DI tank, thanks to patented Elix technology 
• Easy pure or ultrapure water delivery in different lab locations thanks to the PODs
• Easy and intuitive operation
• Application-specific water qualities through customized final polishers
• Built-in resistivity and TOC monitors designed to comply with the most demanding norms, including USP requirements (§ 643 and § 645).
• System manager-specific interface with protection of key set points by a login and password.

Applications

When the system is equipped with a 0.2 µm filter, the high purity water delivered by the system is suitable for HPLC, LC-MS, MALDI-ToF-MS, IC, ICP, AA and most of the analytical techniques commonly used in the laboratory. When an ultrafiltration cartridge (BioPak) is utilized at the point-of-use, the water is suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture. The water produced following the system’s pretreatment step may be used for basic laboratory needs, such as buffer and reagent preparation, microbiology media preparation, histology, dissolution testing (with UV detection) and rinsing of glassware.

Technical Information

Water Purification - Merck Millipore

Ultrapure Water from Pretreated Water for Direct feed to Dionex® Ion Chromatography systems

The Millipore ICW-3000 system is an ideal solution for feeding ultrapure water directly to Dionex Ion Chromatography (IC) eluent generators and suppressor regenerating lines. Just fill the 10-liter tank with pure water to produce ultrapure water that is directly supplied to the ion chromatography system.

The Dionex ICS systems include an eluent generator (EG), which is a device that can produce a defined concentration of eluent from ultrapure water and a concentrated eluent cartridge (potassium hydroxide, potassium carbonate, methanesulfonic acid).The ICW-3000 system allows greater IC analytical precision, while also making operation more convenient when Dionex ICS systems are used in external generation mode. The ICW-3000 system can supply ultrapure water to the suppressor at Adequate pressure and flow rates with no need for gas.

Features

• Improves reproducibility Allows more stable baselines Provides better equilibration of the IC system Reduces instrument downtime needed to refill eluent bottles Reduces IC eluent preparation to almost zero Eliminates the need for helium to pressure feed the supressor Extends IC system lifetime IC remote control can be used to drive the ICW-3000 system Micro valve included for supressor line flow regulation

Technical Information

Water Purification - Merck Millipore

Produce Up to 4000 L/day of Pure Water

Elix systems are designed to produce up to 4000 L/day of Type 2 analytical-grade water from potable tap feedwater to meet or exceed the relevant standards defined by CLSI, ISO® 3696 / BS 3997 and the European and US Pharmacopoeia.

One Complete Purification and Control Unit

Elix systems can be integrated into a centralized system, providing total control of all parameters within the system itself as well as within the external pure water distribution loop.

Applications

Elix product water is suitable for the following applications:

• Microbiological media preparation
• Buffer preparation
• Hydroponics
• Manufacturing chemical and biochemical reagents
• Pharmaceutical use of purified water
• Feed for laboratory equipment
• Feed to Milli-Q and Super-Q ultrapure water systems

Features

Total control of all functions, operating parameters and standard accessory components within the Elix system itself and within the external pure water distribution loop Patented Elix electrodeionization module continuously regenerates ion-exchange resins Built-in resistivity and TOC (Total Organic Carbon) monitoring to ensure water quality No additional softeners are required for most feedwater conditions Easy-to-replace pretreatment packs, tailored to the feedwater source Built-in UV lamp for bacteria-sensitive applications Built-in UV lamp for bacteria-sensitive applications Systems contain integrated control functions for distribution loop components (pump, UV lamp, ASM, TOC and resistivity meters).

Technical Information

Water Purification - Merck Millipore

Elix

The Elix system includes a modular, easily adaptable solution that can be bench-integrated or wall-installed to fit the needs of today’s laboratories. All necessary information for daily use, such as water quality and system status, is visible on the unit’s graphic display.

The system combines Millipore’s state-of-the-art Elix electrodeionization technology with the best purification technologies—Progard pretreatment cartridge, advanced reverse osmosis and an optional 254 nm UV lamp. The Elix system is designed to meet or exceed requirements as described by ISO® 3696 (Grade 2 water); ASTM® D1193 (Type 2 resistivity and TOC Table I specifications); and by the United States, European and Japanese Pharmacopeias for Purified Water. System users gain peace of mind thanks to advanced monitoring capabilities that provide product water quality and delivery measurements.

Elix Advantage

The Elix Advantage system has been designed to meet or exceed Type 2 water quality (corresponding to analytical-grade water) as defined by ASTM®, CLSI® and ISO® 3696/BS 3997. Elix Advantage System water also complies with the purified water requirements from the US, Japanese and European Pharmacopeias.

The Elix Advantage system provides consistent, reliable pure water—saving you time and money. Combining Millipore’ s patented Elix electrodeionization technology with the most advanced purification technologies, the Elix Advantage system uses potable tap water as feed to produce consistent, high quality pure water for all your lab’s needs.

The system provides pressurized, bacteria-free pure water through the E-POD (Elix Point-of-Delivery) units.

The compact water production unit is adapted to laboratory space constraints and can be installed on the wall or under a sink, saving valuable bench space. The exceptional ergonomic design of the E-POD allows for manual or volumetric dispensing of pure water to fill a variety of laboratory vessels (from a 100 mL Erlenmeyer flask to a 20 L carboy).

The system is modular and easily adaptable to evolve with the changes in your lab. Up to three E-PODS can be added per system. There are several application-specific final filters, which can be added to the E-POD units for additional contaminant removal.

Features

• Pure water from potable tap water (up to 300 L/day depending on model)
• Easy to install all-in-one pretreatment pack, which efficiently removes contaminants from tap water
• Advanced reverse osmosis, with a constant product flow rate and reject recovery loop to optimize water consumption
• Millipore’s patented Elix module, which uses electricity (instead of harsh chemicals and water) to continuously regenerate the resins and remove ions from tap water
• Best-in-class monitoring: the resistivity measurement is displayed by the Elix Advantage system, and the system’s self-maintenance functions for the reverse osmosis membrane and cleaning cycles ensure optimum water quality.

Applications

The pure water from the Elix system can be used for laboratory applications such as reagent and buffer preparation, microbiology media preparation, histology applications, purified water for pharmaceutical applications (according to US, Japanese and European Pharmacopeias), and feed for laboratory equipment (washing machines, clinical analyzers, stability chambers, humidifiers, autoclaves, and weatherometers).

It is recommended to use Elix water to feed all ultrapure water purification systems.

Technical Information

Water Purification - Merck Millipore

Type 1 Water Instant Flow Rate Above 0.5 L/min

The Direct-Q 3 systems are designed for simple and intuitive operation. Water quality parameters (resistivity or conductivity, temperature) are clearly indicated on a bright color display. The Direct-Q 3 systems allow delivery of a fixed volume of Type I water and automatically shut off once the selected volume has been delivered.

The Type 1 product water is suitable for most low-volume laboratory applications, including the preparation of buffers for liquid chromatography separations and biochemical experiments, of solutions for analytical techniques such as spectrophotometry and spectroscopy, and of culture media. 

For applications requiring very low organic contaminant levels, the 
Direct-Q 3 UV system also incorporates a dual wavelength UV lamp to produce water with <5 ppb TOC, making it suitable for HPLC, GC, ILC and TOC analyses.

With the BioPak cartridge as a final filter, Direct-Q 3 systems produce pyrogen-free, RNase-free water for cell culture and molecular biology applications.

Applications

• Type 1 water for HPLC mobile phase preparation, sample dilution, buffer and cell culture media preparation, preparation of chemical solutions used with titrators, spectrophotometers and electrophoresis systems, preparation of culture media and reagents for molecular biology applications.
• Type 3 water for low-volume non critical applications such as glassware washing or rinsing.

Features

• Produce Type 1 ultrapure water (18.2 O·cm resistivity at 25 °C an < 10 ppb Total Organic Carbon) on demand directly from potable tap water.
• Available with a built-in 185 and 254 nm UV lamp for production of low TOC water required by organic-sensitive applications.
• Produce Type 3 (Reverse Osmosis) water for basic lab applications at a flow rate of 2.4 L/hr at 15 °C. Type III water is easily available from the 6 L built-in reservoir.
• Maintenance reduced to a simple cartridge change once or twice a year. Ideal for laboratories that do not have easy access to pretreated water and need between 1 and 10 L of ultrapure water per day.
• Alarm warning in case of a sudden drop in the quality of the product water.
• Dispensing adapted to different size laboratory glassware.
• Time-saving fixed volume dispense.

Compliance with Regulatory Standards

Systems are UL and cUL listed under file E216983 in the “Laboratory Use Electrical Equipment Category”, and meet the requirements of UL 61010 standards. Systems conform to European Union CE directives 89/336/CEE (electromagnetic compatibility) and 73/23/CEE (electrical equipment within certain voltage limits). All systems are manufactured in ISO 9001 and ISO 14001 certified environments.
 

Technical Information