Sort by
Comparison View
Show
Part No: CR-1512
Capp special offer - Microfuge Capp Rondo Mini includes rotor for for 2ml x 12 and reduction adaptors for 0.2/0.4/0.5ml microtubes, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 15,596, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter, includes UK plug WHILST STOCKS LAST
£573.00
£617.00
Was £1,190.00
Part No: MICROSPIN12
Grant special offer - Microfuge Grant Bio MICROSPIN 12 includes rotor for 1.5/2.0ml x 12, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 12,400, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter. (replaces part number MICROSPIN 12 UK) OFFER ENDS 31-03-2025
£786.00
£362.00
Was £1,148.00
Part No: CR-68X
Wolf special offer - Microfuge Capp Rondo Microcentrifuge CR-68X includes rotor for for 2ml x 8 and PCR strip rotor (2 x 8 x 0.2ml) and reduction adaptors for 0.2/0.4ml microtubes, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,000, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter, includes UK plug OFFER ENDS 28-02-2025
£179.00
£94.00
Was £273.00
Part No: 90616
Wolf special offer - Microfuge Sigma 1-14 includes rotor for 1.5/2.2ml x 24 (12094,) minimum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 16,602, minimum temperature 26 degs C, maximum temperature 26 degs C, with run counter. OFFER ENDS 31-01-2025
£1,083.00
£776.00
Was £1,859.00
Part No: 85230-00
Wolf special offer - Microfuge Cole-Parmer CF-200 includes rotor for 1.5/2ml x 12, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 15596, no run counter, temperature display or rotors suitable for pre cooling (replaces Cole-Parmer Stuart part number SCF3) OFFER ENDS 28-02-2025
£1,186.00
£464.00
Was £1,650.00
Part No: GB-C1203-P1
Wolf special offer - Microfuge Hettich Mikro 185 with angle rotor (GB-A1226-A) for 0.2/2.0ml x 24 tubes, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 17,008, minimum temperature 26 degs C, maximum temperature 26 degs C, with run counter, no temperature display and rotors not suitable for for pre cooling (replaces part number GB-C1203-GB-A1226) OFFER ENDS 28-02-2025
£1,411.00
£757.00
Was £2,168.00
Part No: 10020-P2
Wolf special offer - Microfuge Sigma 1-14K includes rotor for 1.5/2.2ml x 24 (12094), minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 16,602, minimum temperature -10 degs C, maximum temperature 40 degs C, with run counter. (replaces part number SIG-1-14K-P2) OFFER ENDS 31-01-2025
£3,492.00
£1,601.00
Was £5,093.00
Part No: GB-C2405-P1
Wolf special offer - Microfuge Hettich Mikro 200R with angle rotor (GB-A2434) for 0.2/2ml x 24, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 21,382, minimum temperature -10 degs C, maximum temperature 40 degs C, no run counter OFFER ENDS 28-02-2025
£4,033.00
£2,207.00
Was £6,240.00
Part No: 9031002012
Microfuge DLab D1008 Palm Green, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity x8, maximum g force 7,000, minimum temperature 26 degs C, maximum temperature 26 degs C, with green lid, including two rotors of A8-2 & A4-PCR8 and both adapter SA02P and SA05P2
£108.00
£60.00
Was £168.00
Part No: 9031001012
Microfuge DLab D1008 Palm Blue, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity x8, maximum g force 7,000, minimum temperature 26 degs C, maximum temperature 26 degs C, with blue lid, including two rotors A8-2 and A4-PCR8 and both adapter SA02P2 and SA05P2
£108.00
£60.00
Was £168.00
Part No: BI-25-6
Insert for 25 ml conical tubes. set of 6 pcs. To be used with Ri-6 / Ri-6P rotor. For use with LMC-56
£109.00
£11.00
Was £120.00
Part No: DENTUBE16
Glass Test Tube 16x100mm - 100 pcs/box for use with DEN-1 & DEN-1B
£117.00
£12.00
Was £129.00
Part No: DENTUBE18
Glass Test Tube 18x100mm - 100 pcs/box for use with DEN-1 & DEN-1B
£117.00
£12.00
Was £129.00
Part No: BI-25-8
Insert for 25 ml conical tubes. set of 8 pcs. To be used with BA-2/50 adapter set. For use with LMC-56
£124.00
£15.00
Was £139.00
Part No: SS-6051
Microfuge SciQuip MINI green includes 2 rotors 8 x 1.5/2.2ml and 16 x 0.2ml PCR tubes, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,680, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter
£165.00
£119.00
Was £284.00
Part No: SS-6050
Microfuge SciQuip MINI blue includes 2 rotors for 8 x 1.5/2.2ml and 16 x 0.2ml PCR tubes, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,680, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter
£165.00
£119.00
Was £284.00
Part No: CR-68
Microfuge Capp Rondo Microcentrifuge CR-68 includes rotor for for 2ml x 8 and PCR strip rotor (2 x 8 x 0.2ml) and reduction adaptors for 0.2/0.4ml microtubes, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,000, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter, includes UK plug
£172.00
£67.00
Was £239.00
Part No: QUICKSPIN2
Microfuge Cleaver Scientific Quickspin 2 includes rotor for 6 x 1.5/2ml tubes and rotor for 16 x 0.2ml tubes or 2 x 8 strips, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,000, minimum temperature 26°C, maximum temperature 40°C, no run counter
£192.00
£61.00
Was £253.00
Part No: 30134156
Microfuge Ohaus Frontier FC5306 Mini includes two rotors (30129560 and 30129559) minumum tube volume 0.2ml, maximum tube volume 2ml, 8 maximum tube capacity, maximum g force 2000, minimum temperature 26°C, maximum temperature 26°C, no run counter
£203.00
£76.00
Was £279.00
Part No: QUICKSPINPLUS
Microfuge Cleaver Scientific Quickspin Mini includes rotor for 1.5/2ml tubes and strip tube rotor, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,000, minimum temperature 26°C, maximum temperature 40°C, no run counter (replaces part number QSPINPLUS)
£232.00
£81.00
Was £313.00
Part No: C1008-P-E
Microfuge Benchmark Scientific MyFuge Mini purple includes rotor, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity 8, maximum g force 2,000, minimum temperature 26°C, maximum temperature 26°C, no run counter, no temperature display, rotors not suitable for pre-cooling, bioseal rotors not available as an accessory
£260.00
£150.00
Was £410.00
Part No: C1008-B-E
Microfuge Benchmark Scientific MyFuge Mini blue includes rotor, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity 8, maximum g force 2,000, minimum temperature 26°C, maximum temperature 26°C, no run counter, no temperature display, rotors not suitable for pre-cooling, bioseal rotors not available as an accessory
£260.00
£150.00
Was £410.00
Part No: C1008-R-E
Microfuge Benchmark Scientific MyFuge Mini red includes rotor, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity 8, maximum g force 2,000, minimum temperature 26°C, maximum temperature 26°C, no run counter, no temperature display, rotors not suitable for pre-cooling, bioseal rotors not available as an accessory
£260.00
£150.00
Was £410.00
Part No: C1008-G-E
Microfuge Benchmark Scientific MyFuge Mini green includes rotor, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity 8, maximum g force 2,000, minimum temperature 26°C, maximum temperature 26°C, no run counter, no temperature display, rotors not suitable for pre-cooling, bioseal rotors not available as an accessory
£260.00
£150.00
Was £410.00
Part No: C1008-C-E
Microfuge Benchmark Scientific MyFuge Mini clear includes rotor, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity 8, maximum g force 2,000, minimum temperature 26°C, maximum temperature 26°C, no run counter, no temperature display, rotors not suitable for pre-cooling, bioseal rotors not available as an accessory
£260.00
£150.00
Was £410.00
Part No: DENMCFSTDS18
Set of 6 McFarland Standards 18mm Tube (MCF Stds. 0.5, 1.0, 2.0, 3.0, 4.0, 5.0) for DEN-1, DEN-1B
£286.00
£55.00
Was £341.00
Part No: BN-13/75-16
Set of 16 pcs. buckets for 13x75 mm tubes (e.g.2-5ml vacutainers) To be used with BA-4/VT adapter set. For use with LMC-56
£287.00
£55.00
Was £342.00
Part No: BN-13/100-16
Set of 16 pcs. buckets for 13x100 mm tubes (e.g.4-8 ml vacutainers) To be used with BA-4/VT adapter set. For use with LMC-56
£287.00
£55.00
Was £342.00
Part No: BN-16/100-16
Set of 16 pcs. buckets for 16x100 mm tubes (e.g.8-9 ml vacutainers) To be used with BA-4/VT adapter set. For use with LMC-56
£291.00
£56.00
Was £347.00
£304.00
£58.00
Was £362.00
Part No: 0003958000-IKA001
Microfuge IKA mini G includes rotor for 8 x 1.5/2ml tubes and rotor for 4 x 8 x 0.2ml strips, minumum tube volume 0.2ml, maximum tube volume 2ml, 8 maximum tube capacity, maximum g force 2000, minimum temperature 26°C, maximum temperature 26°C, with no run counter, inclues 1 x 0.5ml x 8 adapter set, 1 x 0.4 x 8ml adapter set and 1 x 0.2ml x 8 adapter set
£317.00
£69.00
Was £386.00
£323.00
£64.00
Was £387.00
Part No: BN-16/100-24
Set of 24 pcs. buckets for 16x100 mm tubes (e.g.8-9 ml vacutainers) To be used with Ri-24/10 rotor. For use with LMC-56
£356.00
£72.00
Was £428.00
Part No: BN-13/75-24
Set of 24 pcs. buckets for 13x75 mm tubes (e.g.2-5ml vacutainers) To be used with Ri-24/10 rotor. For use with LMC-56
£364.00
£74.00
Was £438.00
Part No: BN-13/100-24
Set of 24 pcs. buckets for 13x100 mm tubes (e.g.4-8 ml vacutainers) To be used with Ri-24/10 rotor. For use with LMC-56
£389.00
£79.00
Was £468.00
£396.00
£82.00
Was £478.00
£396.00
£82.00
Was £478.00
Part No: PCV-2400
Microfuge Grant Bio PCV-2400 includes rotor for 1.5/2.0ml x 12 (R-15) and rotor for 0.5ml x 12 and 0.2ml x 12 (R-05-02), minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 700, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter. (replaces part number PCV-2400 UK)
£406.00
£88.00
Was £494.00
Part No: BA-4/RT
Bucket adapters for 4 round bottom centrifuge tubes of 10 ml (set of 4 pcs.) For use with LMC-56
£412.00
£86.00
Was £498.00
Part No: BA-4/FT
Bucket adapters for 4 conical bottom centrifuge tubes of 15 ml (set of 4 pcs.) For use with LMC-56
£433.00
£90.00
Was £523.00
Part No: BA-4/VT
Bucket adapters for 4 vacutainer adapters of 2-9 ml (set of 4 pcs.). Included 8-9 ml [16 x 100] vacutainer adapters, BN-16/100-16. For use with LMC-56
£454.00
£95.00
Was £549.00
£461.00
£98.00
Was £559.00
Part No: BA-2/50
Bucket adapter for 2x 50ml tubes (set of 4 pcs.) To be used with BR-4U rotor. For use with LMC-56
£490.00
£104.00
Was £594.00
£510.00
£109.00
Was £619.00
Part No: BA-14/2U
Bucket adapter for 14x2ml microtest tubes (set of 4 pcs.). To be used with BR-4U rotor. For use with LMC-56
£510.00
£109.00
Was £619.00
£518.00
£111.00
Was £629.00
Part No: BA-8/5
Bucket adapter for 8x 5ml tubes (set of 4 pcs.) To be used with BR-4U rotor. For use with LMC-56
£527.00
£112.00
Was £639.00
Part No: PCV-6000
Microfuge Grant Bio PCV-6000UK includes rotor for 1.5/2.0ml x 12 (R-15) and rotor for 0.5ml x 12 and 0.2ml x 12 (R-05-02), minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 2,350, minimum temperature 26 degs C, maximum temperature 26 degs C, no run counter. (replaces part number PCV-6000 UK)
£598.00
£136.00
Was £734.00
Part No: 9032002132
Microfuge DLab D2012S, minimum tube volume 0.2ml, maximum tube volume 2ml, maximum tube capacity x12, maximum g force 15,000, minimum temperature 26 degs C, maximum temperature 26 degs C, with A12-2P plastic rotor kit DLab (19400010)
£611.00
£310.00
Was £921.00
Understanding Centrifuges - Microfuges
A laboratory microfuge, also known as a microcentrifuge, is a compact, high-speed centrifuge designed for spinning small samples at very high speeds. Typically used in molecular biology and biochemistry labs, it separates substances in a sample based on density, making it essential for tasks such as DNA/RNA extraction, protein purification, and sample concentration. With its small size, it accommodates microcentrifuge tubes or PCR tubes, offering precision and efficiency for high-throughput applications. The microfuge's rapid spinning creates a strong centrifugal force, causing denser components to move to the bottom of the tube, while lighter components remain at the top. This separation process allows researchers to analyse and manipulate microscopic quantities of biological materials effectively.
