Incubators News

Introduction
IKA INC 125 F digital incubator from Wolflabs.

Features and benefits
- Wide temperature range: RT +8° C to 100 °C
- Chamber capacity of 125 L, accommodates up to 6 wired grid trays
- Electronically adjustable ventilation flap and fan speed from 0% to 100%
- Easy to clean chamber made of corrosion-resistant AISI 304 material 
- Additional inner glass door that prevents dissipation of heat when the outer door is opened to observe the samples

Introduction
Haier Biomedical HFP-80 and HZP-168 Constant Climate Incubators from Wolflabs.

Features and benefits
- 7-inch Smart LCD touchscreen
- Multiple safety protection features
- Four operation modes for multiple temperature requirements
- Superior four-sided direct heating technology with an innovative air duct structure
- Large arc angle inner liner, easy to clean

The new LEEC Classic Range of incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber.

Incubator for all standard incubation experiments e.g. in microbiology labs and many more.

Two redLINE by Binder incubators have been added to the website. RI53, RI115, both are digital.

Discounted MINI and INC Incubators. OFFER ENDS 2012-09-30

Discounted RI53 and RI115 Incubators. OFFER ENDS 2012-09-30

New product added to website - P33 Incubator LEEC 730 litre stainless steel chamber fan circulation cooling

New product from Binder added to Incubators. B28 with mechanical control 28L

New products from Stuart added to Incubators. Models include; SI19, SI60, and SI60D

Wolflabs redLINE by Binder :: Incubators - Special Offer OFFER ENDS 2012-12-24

Offers for Incubators from redLINE by Binder. The special offer models are; RI53 and RI115.

Discounts of over 25% - http://www.wolflabs.co.uk/laboratory-products/incubators

New Hettcube series incubators from Hettich have been added.

New BD and BF series incubators from Binder have been added.

Introduction
The Genlab INC General Purpose Incubators offer a range of highly efficient, reliable, cost effective units to suit most biological analysis, research and general laboratory applications.

Features and benefits
- The exterior is constructed from sheet steel finished in an easy clean powder coated paint.
- The interior chamber is made from mild steel coated with aluminium (CLAD) with a stainless steel chamber available as an option.
- Fitted with fixed shelf runners and removable chrome plated wire grid shelves.
- The incubators have a solid steel door as standard.
- Heated by Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the side wall of the chamber for mechanical convection units.
- The 200 litre units have fan circulation as standard.
- The control system comprises of a Microprocessor digital controller and overheat thermostat with calibrated scale and tamper proof lock.
- They also include mains switch with indicator and heat and overheat indicators.

Introduction
The BD series is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media. The new design of the units and the homogeneous temperature distribution ensure the very best results.

Features and benefits
- Homogeneous temperature accuracy thanks to APT.line™ technology
- Controller with LCD display
- Electromechanical control of the exhaust air flap
- Inner door made of tempered safety glass
- 2 chrome-plated racks
- Stackable up to 115L
- Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
- Ergonomic handle design
- USB port for recording data

Introduction
Binder BF series incubators from Wolflabs. The BF series is suitable for demanding incubation tasks, particularly for full loads and large batch throughputs. The latest APT.line technology provides completely homogeneous temperature distribution. With enhanced timer functions and the adjustable fan, temperature and forced convection conditions are easily controlled.

Features and benefits
- Homogeneous temperature accuracy thanks to APT.line technology
- Controller with LCD display
- Electromechanical control of the exhaust air flap
- Inner door made of tempered safety glass
- 2 chrome-plated racks
- Stackable up to 115 L
- Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
- Ergonomic handle design
- USB port for recording data

Prices starting at £439 - http://www.wolflabs.co.uk/laboratory-products/incubators

Introduction
LEEC classic incubators from Wolflabs. LEEC Classic Incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber.

Features and benefits
- Energy efficient
- Simple to use
- Fully sealed chamber with radius corners
- Accurate temperature control
- Fan assisted air circulation
- All stainless steel construction
- Fast recovery time

Introduction
Genlab Mini Economy incubators from Wolflabs. The Genlab Economy range of Incubators offer a range of highly efficient, reliable, cost effective units to suit most biological analysis, research and general laboratory applications. The simple to use thermostat system is good for teaching purposes and the units can be built up to meet individual requirements.

Features and benefits
- 7 sizes 6 to 100 litres
- Temperature range: Ambient +5°C to 70°C without fan
- Ambient +8°C to 70°C if fan fitted
- Fluctuation ± 0.25°C @ 37°C
- Easy clean powder coated body
- Aluminium coated mild steel chamber
- Direct reading thermostat
- Safety overheat thermostat
- Full two year warranty
- C.E. compliant

Introduction
Genlab LCI incubators from Wolflabs. The Genlab large capacity multipurpose incubators offer a unique range of highly efficient, reliable and accurate units suitable for much larger applications in incubation, research and general laboratory applications.

Features and benefits
- Capacities 250 to 1250 Litres, 8 sizes vertical style, 9 sizes horizontal style
- Temperature range: ambient + 8ºC to 70ºC
- Microprocessor digital controller with dual display of set point and actual temperature
- Safety overheat thermostat 0-99 hour process timer 8 segment program (4 ramp 4 dwell)
- Forced convection fan circulation
- Easy clean powder coated body
- Aluminium coated mild steel chamber
- Fitted castors on units 650 litre and above
- Full two year warranty
- C.E. compliant

Prices starting at £467 - http://www.wolflabs.co.uk/laboratory-products/incubators

Introduction
Binder B28 incubator from Wolflabs. With the B series incubator you get a reliable and powerful unit in a solid configuration at a very attractive price.

Features and benefits
- Temperature range: 30 °C to 70 °C
- Hydro-mechanical thermostat
- Inner door made of tempered safety glass
- 2 chrome-plated racks

Introduction
LEEC Precision incubators from Wolflabs. The LEEC P33 Precision Incubator combines traditional styling and modern controls for precise temperature control in a large capacity stainless steel chamber.

Features and benefits
- Ideal for use at 37.0°C
- Large storage capacity
- Microprocessor temperature controller
- Fan assisted
- Over temperature protection
- Stainless steel chamber and shelves
- CFC-free insulation
- Inner glass doors

Introduction
New IFA incubators from Esco have been added. Introducing Esco Isotherm - world class laboratory incubators from Esco for thermal convection applications such as bacteria culture and coliform determination among many others. With ergonomic design, microprocessor PID controls, 4-zone heated air jacket and precisely tuned and tested ventilation and insulation package, Esco Isotherm is your reliable incubator for universal application.

Features and benefits
- Multiple redundant over-temperature protection systems to guarantee maximum sample and user protection.
- Electronic over-temperature protection built into the microprocessor.
- Redundant mechanical over-temperature protection, adjustable from the front, independent from the microprocessor.
- Overall temperature protection meets DIN 12880 Class 3.1.
- Red LED illuminates if external mechanical temperature protection is engaged.
- Controller will control temperature at the over temperature setpoint.
- All electrical components UL recognized.
- Electrical circuit protection in accordance with UL requirements.
- Ergonomic door handle, operation is gravity assisted.
- Bright LED displays mounted at top (not base) of the device are easily read from across the laboratory.
- 2 shelves in all the models.
- Directly mounted shelves increase usable chamber space.
- "Cleanroom" design with minimal joints and crevices is easy to clean.
- Single piece stainless steel chamber with rounded corners.
- Formed direct shelf mounts reduce chamber hardware and reduce difficult to clean spaces.
- Glass door is dismountable without tools for easy cleaning.
- Diagnostic functions in the microprocessor include historical read-out of temperatures.
- Diagnostic menu provides read-out of all sensor inputs and controller settings.
- Service can be carried out from the front.
- All electronic components are isolated from the work chamber, and easily accessible for replacement.
- Low service costs.
- Access port available as a standard feature.

Introduction
Genlab INC series of incubators from Wolflabs. The Genlab INC General Purpose Incubators offer a range of highly efficient, reliable, cost effective units to suit most biological analysis, research and general laboratory applications.

Features and benefits
- 6 sizes 50 to 200 litres
- Temperature range: ambient +5ºC to 70ºC without fan ambient +8ºC to 70ºC if fan fitted
- Fluctuation +/- 0.25ºC @ 37ºC
- Easy clean powder coated body
- Aluminium coated mild steel chamber
- Microprocessor Digital Controller
- Safety overheat thermostat
- Full two year warranty
- C.E. compliant

Introduction
Binder BD260 incubator from Wolflabs. The BD Avantgarde.Line series is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media. The new design of the units and the homogeneous temperature distribution ensure the very best results.

Features and benefits
- Temperature range: ambient temperature plus 5 °C to 100 °C
- High temperature accuracy thanks to APT.line technology
- Natural convection
- Controller with LCD display
- Electromechanical control of the exhaust air flap
- Inner door made of tempered safety glass
- 2 chrome-plated racks
- Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
- Ergonomic handle design
- USB port for recording data

Discounts of almost 30% - https://www.wolflabs.co.uk/laboratory-products/incubators

New BD720 and BF720 incubators from Binder have been added.

Introduction
LEEC Classic incubators from Wolflabs. LEEC Classic incubators are ideal for routine microbiology work and incubating samples. 

Features and benefits
- Energy efficient
- Simple to use
- Fully sealed chamber with radius corners
- Accurate temperature control
- Fan assisted air circulation
- All stainless steel construction
- Fast recovery time

Introduction
New NE8S incubators from Clifton have been added. Clifton incubators feature intuitive easy to use controls with on screen guidance within a bold illuminated LCD display, offering precise time and temperature control from ambient +5°C to 100°C.

Features and benefits
- Range: ambient +5°C to 100°C.
- Dual pt100 temperature probes.
- Intuitive to use controls, illuminated LCD display, touch sensitive keypads with prompts.
- Run continuously at set temperature, delay start or commence to start on a date and time in the future.
- Offers 3 programs, up to 6 temperature and time segments in each program.
- Program control of fan speed, exhaust air flap, temperature, time, immediate start, delay start, future start.
- Data logging to USB.
- Auto diagnostics with sensor alarms.
- Power fail alarm, recording and resumption.
- High and low temperature alarm.
- Door opening sounder and alarm.
- Over temperature protection and sample protection.

Introduction
Hettich HettCube model incubators from Wolflabs. 

Features and benefits
- The door does not require space at the side to open. This means that the incubator can be positioned in a corner or close to other lab equipment. The door hinges can easily be moved from one side of the incubator to the other.
- One bushing on the rear panel is provided as standard. 
- The practical door-locking mechanism locks both the door and the control panel at the same time. This prevents inadvertent changes to parameters and harmful effects on cultures.
- A HettCube incubator will close automatically at an opening angle below 90 °. A magnetic mechanism assists this automatic closing.
- Rounded grips on the standard shelves keep your gloves safe from ripping.
- The internal lining, drawers and shelves are made of stainless steel and can be readily removed for thorough cleaning and autoclaving.

Introduction
New UI 950 incubator from Analytik Jena has been added. The UVP Incubator provides precise temperature control and uniformity for the incubation of biological assays, fungal, bacterial cultures, eggs and other samples up to 68 °C. The instrument is equipped with built-in overhead shortwave 254nm UV tubes for sterilization of the incubation chamber between experiments.

Features and benefits
- Minimal benchtop space
- Microprocessor controlled for high temperature uniformity
- Reliable sterilization by shortwave (254nm) UV light
- Shelves adjustable at three positions

Introduction
Cole-Palmer - Stuart SI60D incubator from Wolflabs.

Benefits anf features
- Full visibility of samples.
- Easy access to working chamber.
- Choice of analogue or digital control.
- Many applications such as plant propagation, humidity tests, simulation of tropical conditions and corrosion testing.

Introduction
Leec P33 incubator from Wolflabs.

Features and benefits
- Stainless steel chamber.
- Adjustable shelves.
- Overtemperature safety cutout is set digitally.
- Overtemperature visual warning.
- Large LED digital display.

Introduction
Binder BF400 Classic.Line incubator from Wolflabs. Mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times.

Features and benefits
- Disinfection routine at 100 °C.
- Stable atmosphere by inner glass door.
- Adjustable fan speed.
- Adjustable exhaust air flap.
- Controller with timer functions.
- Inner door made of tempered safety glass.

Introduction
LTE Scientific IP250-M incubator from Wolflabs. The IP250-M incubator offers maximum flexibility and unparalleled performance for the ever increasing demands of today’s laboratory. Traditional quality and modern manufacturing techniques linked with LTE’s built-in reliability mean that this incubator represents excellent value. Our multi-program controller will even allow up to 8 multiple-step cycles to be stored in the memory at any one time. It also incorporates a selectable temperature ramping function, which allows controlled temperature rise and fall rates to be programmed into a cycle. At the end of a program sequence, the controller can be programmed to stop or repeat the sequence again.

Features and benefits
- Temperature Range 30°C to 80°C.
- Stainless steel radiused interiors.
- Adjustable shelf positions.
- Adjustable vent.
- Auto-recovery options.

Introduction
LEEC C100 incubator from Wolflabs. The C100 has fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the C100 Incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the chamber.

Feautures and benefits
- Energy efficient.
- Simple to use.
- Fully sealed chamber with radius corners.
- Accurate temperature control.
- Fan assisted air circulation.
- All stainless steel construction.
- Fast recovery time.

Introduction
Genlab LCI/850H/TDIG incubator from Wolflabs. The Genlab range of large capacity incubators offers a selection of highly efficient, reliable and cost effective units. They are suitable for larger applications of incubation, research and general laboratory applications. Featuring our latest touch screen control system which offers intuitive control and excellent accuracies designed for laboratory incubators.

Features and benefits
- Temp range (ambient+ 5)°C to 70°C.
- On screen historical trending (48hours).
- Count down timer.
- Manual or automatic overheat reset.
- Fan assisted circulation.

Introduction
Cole-Parmer - Stuart SI19 incubator from Wolflabs. The SI19 is specially designed for use with microtitre plates, which can be difficult to incubate. In most incubators, when 4 or more plates are placed on a shelf, they block the air circulation, which can seriously impair temperature distribution. The Stuart SI19 Incubator overcomes this problem with forced air circulation, which blows preheated air across the shelves rather than just through them. Microtitre plates are also prone to drying out during incubation. The SI19 overcomes this with a water tray to increase the humidity within the chamber making it the ideal incubator for the laboratory.

Features and benefits
- Compact unit.
- Ideal for microtitre plates and petri dishes.
- Laminar flow air circulation.
- Digital setting and display of temperature.
- Convenient upward opening door.
- Stainless steel interior.

Introduction
Genlab incubator Prime XL PRI/850H/TDIG from Wolflabs. The Prime XL PRI/850H/TDIG is built to the highest standards and packed with features and enhancements. As standard, the Prime XL range offers a mirror polished stainless steel interior, increased accuracies and an extended temperature range of 100.0°C. Built around a heavy duty panelled framework, we can offer increased load capability in this range and multiple reinforced shelves. It features our latest touch screen control system which offers intuitive control designed for laboratory and industrial incubators.

Features and benefits
- Mirror polished stainless steel chamber.
- Count down timer.
- Manual or automatic overheat reset.
- Fan assisted circulation.

Introduction
LTE Scientific LI/SWL/50/1 incubator from Wolflabs. The LI/SWL/50/1 incubator offers precise control and is designed to meet the ever increasing demands of the modern laboratory and process facility.

Features and benefits
- Touch-pad microprocessor control system.
- Watchdog system with display.
- Multi-profile as standard.
- Fan circulated.

"Hi Emma
Yes, thanks Emma. Apologies for not letting you know sooner. All present and correct. Delivery went very smoothly. Thanks very much for everything. I’m looking forward to using the new toys!
Best wishes
Jonathan"

Introduction
Analytik Jena UI 950 incubator from Wolflabs. The UI 950 Incubator provides precise temperature control and uniformity for the incubation of biological assays, fungal, bacterial cultures, eggs and other samples up to 68 °C. 

Features and benefits
- Minimal benchtop space.
- Microprocessor controlled for high temperature uniformity.
- Shelves adjustable at three positions.
- Reliable sterilization by shortwave (254nm) UV light.

Introduction
Binder BD115 Avantgarde.Line incubator from Wolflabs.The BD115 Avantgarde.Line is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media. The new design of the units and the homogeneous temperature distribution ensure the very best results

Features and benefits
- Excellent temporal and spatial temperature accuracy.
- High process reliability.
- 100 °C disinfection routine.

Introduction
LEEC C157 incubator from Wolflabs. The C157 has a fully sealed chamber manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance.

Features and benefits
- Stainless steel construction.
- Energy efficient.
- Fully sealed chamber.
- Simple to use.
- Fast recovery time.
- Digital temperature control.

Introduction
Genlab INC/125/TDIG incubator from Wolflabs.

Features and benefits
- Low chamber uniformity.
- Energy efficient with integral energy meter.
- Manual or automatic overheat reset.
- High resolution 0.1ºC.

Introduction
Binder B28 incubator from Wolflabs.

Features and benefits
- Temperature range: 30 °C to 70 °C.
- Hydro-mechanical thermostat.
- Inner door made of tempered safety glass.
- 2 chrome-plated racks.
- Inner glass door for a stable atmosphere.

Introduction
Binder BD23 Classic.Line incubator from Wolflabs.

Features and benefits
- Adjustable exhaust air flap
- Controller with timer functions.
- Inner door made of tempered safety glass.
- Safe and reproducible incubation even under high batch throughputs in long-term operation.
- Disinfection routine at 100 °C.

Introduction
Genlab MINI/18 incubator from Wolflabs.

Features and benefits
- Simple thermostat system is easy to use.
- Exterior constructed from sheet steel finished in an easy clean powder coated paint.
- Interior chamber made from mild steel coated with aluminum with a stainless steel chamber available as an option.
- Insulated door as standard.

New IN and IF incubators from Memmert have been added.

New SI60, SI60D and SI19 incubators from Cole-Parmer - Stuart have been added.

Introduction
NEW Gem Scientific MX25 Mini Incubator from Wolflabs.

Features and benefits
- Features MX Precision Electronic Temperature Control Technology
- Typical load capacity of up to 25 dip-slides or 30 Petri-dishes (95mm)
- Robustly designed to work in the most hostile working environments
- +5 to 45oC +/- 0.5oC ambient temperature range
- Optional in-vehicle power adapter available